'use strict';
'require uci';
'require rpc';
'require validation';
'require baseclass';
'require firewall';
var proto_errors = {
CONNECT_FAILED: _('Connection attempt failed'),
INVALID_ADDRESS: _('IP address is invalid'),
INVALID_GATEWAY: _('Gateway address is invalid'),
INVALID_LOCAL_ADDRESS: _('Local IP address is invalid'),
MISSING_ADDRESS: _('IP address is missing'),
MISSING_PEER_ADDRESS: _('Peer address is missing'),
NO_DEVICE: _('Network device is not present'),
NO_IFACE: _('Unable to determine device name'),
NO_IFNAME: _('Unable to determine device name'),
NO_WAN_ADDRESS: _('Unable to determine external IP address'),
NO_WAN_LINK: _('Unable to determine upstream interface'),
PEER_RESOLVE_FAIL: _('Unable to resolve peer host name'),
PIN_FAILED: _('PIN code rejected')
};
var iface_patterns_ignore = [
/^wmaster\d+/,
/^wifi\d+/,
/^hwsim\d+/,
/^imq\d+/,
/^ifb\d+/,
/^mon\.wlan\d+/,
/^sit\d+/,
/^gre\d+/,
/^gretap\d+/,
/^ip6gre\d+/,
/^ip6tnl\d+/,
/^tunl\d+/,
/^lo$/
];
var iface_patterns_wireless = [
/^wlan\d+/,
/^wl\d+/,
/^ath\d+/,
/^\w+\.network\d+/
];
var iface_patterns_virtual = [ ];
var callLuciNetworkDevices = rpc.declare({
object: 'luci-rpc',
method: 'getNetworkDevices',
expect: { '': {} }
});
var callLuciWirelessDevices = rpc.declare({
object: 'luci-rpc',
method: 'getWirelessDevices',
expect: { '': {} }
});
var callLuciBoardJSON = rpc.declare({
object: 'luci-rpc',
method: 'getBoardJSON'
});
var callLuciHostHints = rpc.declare({
object: 'luci-rpc',
method: 'getHostHints',
expect: { '': {} }
});
var callIwinfoAssoclist = rpc.declare({
object: 'iwinfo',
method: 'assoclist',
params: [ 'device', 'mac' ],
expect: { results: [] }
});
var callIwinfoScan = rpc.declare({
object: 'iwinfo',
method: 'scan',
params: [ 'device' ],
nobatch: true,
expect: { results: [] }
});
var callNetworkInterfaceDump = rpc.declare({
object: 'network.interface',
method: 'dump',
expect: { 'interface': [] }
});
var callNetworkProtoHandlers = rpc.declare({
object: 'network',
method: 'get_proto_handlers',
expect: { '': {} }
});
var _init = null,
_state = null,
_protocols = {},
_protospecs = {};
function getProtocolHandlers(cache) {
return callNetworkProtoHandlers().then(function(protos) {
/* Register "none" protocol */
if (!protos.hasOwnProperty('none'))
Object.assign(protos, { none: { no_device: false } });
/* Hack: emulate relayd protocol */
if (!protos.hasOwnProperty('relay') && L.hasSystemFeature('relayd'))
Object.assign(protos, { relay: { no_device: true } });
Object.assign(_protospecs, protos);
return Promise.all(Object.keys(protos).map(function(p) {
return Promise.resolve(L.require('protocol.%s'.format(p))).catch(function(err) {
if (L.isObject(err) && err.name != 'NetworkError')
L.error(err);
});
})).then(function() {
return protos;
});
}).catch(function() {
return {};
});
}
function getWifiStateBySid(sid) {
var s = uci.get('wireless', sid);
if (s != null && s['.type'] == 'wifi-iface') {
for (var radioname in _state.radios) {
for (var i = 0; i < _state.radios[radioname].interfaces.length; i++) {
var netstate = _state.radios[radioname].interfaces[i];
if (typeof(netstate.section) != 'string')
continue;
var s2 = uci.get('wireless', netstate.section);
if (s2 != null && s['.type'] == s2['.type'] && s['.name'] == s2['.name']) {
if (s2['.anonymous'] == false && netstate.section.charAt(0) == '@')
return null;
return [ radioname, _state.radios[radioname], netstate ];
}
}
}
}
return null;
}
function getWifiStateByIfname(ifname) {
for (var radioname in _state.radios) {
for (var i = 0; i < _state.radios[radioname].interfaces.length; i++) {
var netstate = _state.radios[radioname].interfaces[i];
if (typeof(netstate.ifname) != 'string')
continue;
if (netstate.ifname == ifname)
return [ radioname, _state.radios[radioname], netstate ];
}
}
return null;
}
function isWifiIfname(ifname) {
for (var i = 0; i < iface_patterns_wireless.length; i++)
if (iface_patterns_wireless[i].test(ifname))
return true;
return false;
}
function getWifiSidByNetid(netid) {
var m = /^(\w+)\.network(\d+)$/.exec(netid);
if (m) {
var sections = uci.sections('wireless', 'wifi-iface');
for (var i = 0, n = 0; i < sections.length; i++) {
if (sections[i].device != m[1])
continue;
if (++n == +m[2])
return sections[i]['.name'];
}
}
return null;
}
function getWifiSidByIfname(ifname) {
var sid = getWifiSidByNetid(ifname);
if (sid != null)
return sid;
var res = getWifiStateByIfname(ifname);
if (res != null && L.isObject(res[2]) && typeof(res[2].section) == 'string')
return res[2].section;
return null;
}
function getWifiNetidBySid(sid) {
var s = uci.get('wireless', sid);
if (s != null && s['.type'] == 'wifi-iface') {
var radioname = s.device;
if (typeof(radioname) == 'string') {
var sections = uci.sections('wireless', 'wifi-iface');
for (var i = 0, n = 0; i < sections.length; i++) {
if (sections[i].device != s.device)
continue;
n++;
if (sections[i]['.name'] != s['.name'])
continue;
return [ '%s.network%d'.format(s.device, n), s.device ];
}
}
}
return null;
}
function getWifiNetidByNetname(name) {
var sections = uci.sections('wireless', 'wifi-iface');
for (var i = 0; i < sections.length; i++) {
if (typeof(sections[i].network) != 'string')
continue;
var nets = sections[i].network.split(/\s+/);
for (var j = 0; j < nets.length; j++) {
if (nets[j] != name)
continue;
return getWifiNetidBySid(sections[i]['.name']);
}
}
return null;
}
function isVirtualIfname(ifname) {
for (var i = 0; i < iface_patterns_virtual.length; i++)
if (iface_patterns_virtual[i].test(ifname))
return true;
return false;
}
function isIgnoredIfname(ifname) {
for (var i = 0; i < iface_patterns_ignore.length; i++)
if (iface_patterns_ignore[i].test(ifname))
return true;
return false;
}
function appendValue(config, section, option, value) {
var values = uci.get(config, section, option),
isArray = Array.isArray(values),
rv = false;
if (isArray == false)
values = L.toArray(values);
if (values.indexOf(value) == -1) {
values.push(value);
rv = true;
}
uci.set(config, section, option, isArray ? values : values.join(' '));
return rv;
}
function removeValue(config, section, option, value) {
var values = uci.get(config, section, option),
isArray = Array.isArray(values),
rv = false;
if (isArray == false)
values = L.toArray(values);
for (var i = values.length - 1; i >= 0; i--) {
if (values[i] == value) {
values.splice(i, 1);
rv = true;
}
}
if (values.length > 0)
uci.set(config, section, option, isArray ? values : values.join(' '));
else
uci.unset(config, section, option);
return rv;
}
function prefixToMask(bits, v6) {
var w = v6 ? 128 : 32,
m = [];
if (bits > w)
return null;
for (var i = 0; i < w / 16; i++) {
var b = Math.min(16, bits);
m.push((0xffff << (16 - b)) & 0xffff);
bits -= b;
}
if (v6)
return String.prototype.format.apply('%x:%x:%x:%x:%x:%x:%x:%x', m).replace(/:0(?::0)+$/, '::');
else
return '%d.%d.%d.%d'.format(m[0] >>> 8, m[0] & 0xff, m[1] >>> 8, m[1] & 0xff);
}
function maskToPrefix(mask, v6) {
var m = v6 ? validation.parseIPv6(mask) : validation.parseIPv4(mask);
if (!m)
return null;
var bits = 0;
for (var i = 0, z = false; i < m.length; i++) {
z = z || !m[i];
while (!z && (m[i] & (v6 ? 0x8000 : 0x80))) {
m[i] = (m[i] << 1) & (v6 ? 0xffff : 0xff);
bits++;
}
if (m[i])
return null;
}
return bits;
}
function initNetworkState(refresh) {
if (_state == null || refresh) {
_init = _init || Promise.all([
L.resolveDefault(callNetworkInterfaceDump(), []),
L.resolveDefault(callLuciBoardJSON(), {}),
L.resolveDefault(callLuciNetworkDevices(), {}),
L.resolveDefault(callLuciWirelessDevices(), {}),
L.resolveDefault(callLuciHostHints(), {}),
getProtocolHandlers(),
L.resolveDefault(uci.load('network')),
L.hasSystemFeature('wifi') ? L.resolveDefault(uci.load('wireless')) : L.resolveDefault(),
L.resolveDefault(uci.load('luci'))
]).then(function(data) {
var netifd_ifaces = data[0],
board_json = data[1],
luci_devs = data[2];
var s = {
isTunnel: {}, isBridge: {}, isSwitch: {}, isWifi: {},
ifaces: netifd_ifaces, radios: data[3], hosts: data[4],
netdevs: {}, bridges: {}, switches: {}, hostapd: {}
};
for (var name in luci_devs) {
var dev = luci_devs[name];
if (isVirtualIfname(name))
s.isTunnel[name] = true;
if (!s.isTunnel[name] && isIgnoredIfname(name))
continue;
s.netdevs[name] = s.netdevs[name] || {
idx: dev.ifindex,
name: name,
rawname: name,
flags: dev.flags,
link: dev.link,
stats: dev.stats,
macaddr: dev.mac,
type: dev.type,
devtype: dev.devtype,
mtu: dev.mtu,
qlen: dev.qlen,
wireless: dev.wireless,
parent: dev.parent,
ipaddrs: [],
ip6addrs: []
};
if (Array.isArray(dev.ipaddrs))
for (var i = 0; i < dev.ipaddrs.length; i++)
s.netdevs[name].ipaddrs.push(dev.ipaddrs[i].address + '/' + dev.ipaddrs[i].netmask);
if (Array.isArray(dev.ip6addrs))
for (var i = 0; i < dev.ip6addrs.length; i++)
s.netdevs[name].ip6addrs.push(dev.ip6addrs[i].address + '/' + dev.ip6addrs[i].netmask);
}
for (var name in luci_devs) {
var dev = luci_devs[name];
if (!dev.bridge)
continue;
var b = {
name: name,
id: dev.id,
stp: dev.stp,
ifnames: []
};
for (var i = 0; dev.ports && i < dev.ports.length; i++) {
var subdev = s.netdevs[dev.ports[i]];
if (subdev == null)
continue;
b.ifnames.push(subdev);
subdev.bridge = b;
}
s.bridges[name] = b;
s.isBridge[name] = true;
}
for (var name in luci_devs) {
var dev = luci_devs[name];
if (!dev.parent || dev.devtype != 'dsa')
continue;
s.isSwitch[dev.parent] = true;
s.isSwitch[name] = true;
}
if (L.isObject(board_json.switch)) {
for (var switchname in board_json.switch) {
var layout = board_json.switch[switchname],
netdevs = {},
nports = {},
ports = [],
pnum = null,
role = null;
if (L.isObject(layout) && Array.isArray(layout.ports)) {
for (var i = 0, port; (port = layout.ports[i]) != null; i++) {
if (typeof(port) == 'object' && typeof(port.num) == 'number' &&
(typeof(port.role) == 'string' || typeof(port.device) == 'string')) {
var spec = {
num: port.num,
role: port.role || 'cpu',
index: (port.index != null) ? port.index : port.num
};
if (port.device != null) {
spec.device = port.device;
spec.tagged = spec.need_tag;
netdevs[port.num] = port.device;
}
ports.push(spec);
if (port.role != null)
nports[port.role] = (nports[port.role] || 0) + 1;
}
}
ports.sort(function(a, b) {
return L.naturalCompare(a.role, b.role) || L.naturalCompare(a.index, b.index);
});
for (var i = 0, port; (port = ports[i]) != null; i++) {
if (port.role != role) {
role = port.role;
pnum = 1;
}
if (role == 'cpu')
port.label = 'CPU (%s)'.format(port.device);
else if (nports[role] > 1)
port.label = '%s %d'.format(role.toUpperCase(), pnum++);
else
port.label = role.toUpperCase();
delete port.role;
delete port.index;
}
s.switches[switchname] = {
ports: ports,
netdevs: netdevs
};
}
}
}
if (L.isObject(board_json.dsl) && L.isObject(board_json.dsl.modem)) {
s.hasDSLModem = board_json.dsl.modem;
}
_init = null;
var objects = [];
if (L.isObject(s.radios))
for (var radio in s.radios)
if (L.isObject(s.radios[radio]) && Array.isArray(s.radios[radio].interfaces))
for (var i = 0; i < s.radios[radio].interfaces.length; i++)
if (L.isObject(s.radios[radio].interfaces[i]) && s.radios[radio].interfaces[i].ifname)
objects.push('hostapd.%s'.format(s.radios[radio].interfaces[i].ifname));
return (objects.length ? L.resolveDefault(rpc.list.apply(rpc, objects), {}) : Promise.resolve({})).then(function(res) {
for (var k in res) {
var m = k.match(/^hostapd\.(.+)$/);
if (m)
s.hostapd[m[1]] = res[k];
}
return (_state = s);
});
});
}
return (_state != null ? Promise.resolve(_state) : _init);
}
function ifnameOf(obj) {
if (obj instanceof Protocol)
return obj.getIfname();
else if (obj instanceof Device)
return obj.getName();
else if (obj instanceof WifiDevice)
return obj.getName();
else if (obj instanceof WifiNetwork)
return obj.getIfname();
else if (typeof(obj) == 'string')
return obj.replace(/:.+$/, '');
return null;
}
function networkSort(a, b) {
return L.naturalCompare(a.getName(), b.getName());
}
function deviceSort(a, b) {
var typeWeigth = { wifi: 2, alias: 3 };
return L.naturalCompare(typeWeigth[a.getType()] || 1, typeWeigth[b.getType()] || 1) ||
L.naturalCompare(a.getName(), b.getName());
}
function formatWifiEncryption(enc) {
if (!L.isObject(enc))
return null;
if (!enc.enabled)
return 'None';
var ciphers = Array.isArray(enc.ciphers)
? enc.ciphers.map(function(c) { return c.toUpperCase() }) : [ 'NONE' ];
if (Array.isArray(enc.wep)) {
var has_open = false,
has_shared = false;
for (var i = 0; i < enc.wep.length; i++)
if (enc.wep[i] == 'open')
has_open = true;
else if (enc.wep[i] == 'shared')
has_shared = true;
if (has_open && has_shared)
return 'WEP Open/Shared (%s)'.format(ciphers.join(', '));
else if (has_open)
return 'WEP Open System (%s)'.format(ciphers.join(', '));
else if (has_shared)
return 'WEP Shared Auth (%s)'.format(ciphers.join(', '));
return 'WEP';
}
if (Array.isArray(enc.wpa)) {
var versions = [],
suites = Array.isArray(enc.authentication)
? enc.authentication.map(function(a) { return a.toUpperCase() }) : [ 'NONE' ];
for (var i = 0; i < enc.wpa.length; i++)
switch (enc.wpa[i]) {
case 1:
versions.push('WPA');
break;
default:
versions.push('WPA%d'.format(enc.wpa[i]));
break;
}
if (versions.length > 1)
return 'mixed %s %s (%s)'.format(versions.join('/'), suites.join(', '), ciphers.join(', '));
return '%s %s (%s)'.format(versions[0], suites.join(', '), ciphers.join(', '));
}
return 'Unknown';
}
function enumerateNetworks() {
var uciInterfaces = uci.sections('network', 'interface'),
networks = {};
for (var i = 0; i < uciInterfaces.length; i++)
networks[uciInterfaces[i]['.name']] = this.instantiateNetwork(uciInterfaces[i]['.name']);
for (var i = 0; i < _state.ifaces.length; i++)
if (networks[_state.ifaces[i].interface] == null)
networks[_state.ifaces[i].interface] =
this.instantiateNetwork(_state.ifaces[i].interface, _state.ifaces[i].proto);
var rv = [];
for (var network in networks)
if (networks.hasOwnProperty(network))
rv.push(networks[network]);
rv.sort(networkSort);
return rv;
}
var Hosts, Network, Protocol, Device, WifiDevice, WifiNetwork;
/**
* @class network
* @memberof LuCI
* @hideconstructor
* @classdesc
*
* The `LuCI.network` class combines data from multiple `ubus` APIs to
* provide an abstraction of the current network configuration state.
*
* It provides methods to enumerate interfaces and devices, to query
* current configuration details and to manipulate settings.
*/
Network = baseclass.extend(/** @lends LuCI.network.prototype */ {
/**
* Converts the given prefix size in bits to a netmask.
*
* @method
*
* @param {number} bits
* The prefix size in bits.
*
* @param {boolean} [v6=false]
* Whether to convert the bits value into an IPv4 netmask (`false`) or
* an IPv6 netmask (`true`).
*
* @returns {null|string}
* Returns a string containing the netmask corresponding to the bit count
* or `null` when the given amount of bits exceeds the maximum possible
* value of `32` for IPv4 or `128` for IPv6.
*/
prefixToMask: prefixToMask,
/**
* Converts the given netmask to a prefix size in bits.
*
* @method
*
* @param {string} netmask
* The netmask to convert into a bits count.
*
* @param {boolean} [v6=false]
* Whether to parse the given netmask as IPv4 (`false`) or IPv6 (`true`)
* address.
*
* @returns {null|number}
* Returns the number of prefix bits contained in the netmask or `null`
* if the given netmask value was invalid.
*/
maskToPrefix: maskToPrefix,
/**
* An encryption entry describes active wireless encryption settings
* such as the used key management protocols, active ciphers and
* protocol versions.
*
* @typedef {Object<string, boolean|Array<number|string>>} LuCI.network.WifiEncryption
* @memberof LuCI.network
*
* @property {boolean} enabled
* Specifies whether any kind of encryption, such as `WEP` or `WPA` is
* enabled. If set to `false`, then no encryption is active and the
* corresponding network is open.
*
* @property {string[]} [wep]
* When the `wep` property exists, the network uses WEP encryption.
* In this case, the property is set to an array of active WEP modes
* which might be either `open`, `shared` or both.
*
* @property {number[]} [wpa]
* When the `wpa` property exists, the network uses WPA security.
* In this case, the property is set to an array containing the WPA
* protocol versions used, e.g. `[ 1, 2 ]` for WPA/WPA2 mixed mode or
* `[ 3 ]` for WPA3-SAE.
*
* @property {string[]} [authentication]
* The `authentication` property only applies to WPA encryption and
* is defined when the `wpa` property is set as well. It points to
* an array of active authentication suites used by the network, e.g.
* `[ "psk" ]` for a WPA(2)-PSK network or `[ "psk", "sae" ]` for
* mixed WPA2-PSK/WPA3-SAE encryption.
*
* @property {string[]} [ciphers]
* If either WEP or WPA encryption is active, then the `ciphers`
* property will be set to an array describing the active encryption
* ciphers used by the network, e.g. `[ "tkip", "ccmp" ]` for a
* WPA/WPA2-PSK mixed network or `[ "wep-40", "wep-104" ]` for an
* WEP network.
*/
/**
* Converts a given {@link LuCI.network.WifiEncryption encryption entry}
* into a human readable string such as `mixed WPA/WPA2 PSK (TKIP, CCMP)`
* or `WPA3 SAE (CCMP)`.
*
* @method
*
* @param {LuCI.network.WifiEncryption} encryption
* The wireless encryption entry to convert.
*
* @returns {null|string}
* Returns the description string for the given encryption entry or
* `null` if the given entry was invalid.
*/
formatWifiEncryption: formatWifiEncryption,
/**
* Flushes the local network state cache and fetches updated information
* from the remote `ubus` apis.
*
* @returns {Promise<Object>}
* Returns a promise resolving to the internal network state object.
*/
flushCache: function() {
initNetworkState(true);
return _init;
},
/**
* Instantiates the given {@link LuCI.network.Protocol Protocol} back-end,
* optionally using the given network name.
*
* @param {string} protoname
* The protocol back-end to use, e.g. `static` or `dhcp`.
*
* @param {string} [netname=__dummy__]
* The network name to use for the instantiated protocol. This should be
* usually set to one of the interfaces described in /etc/config/network
* but it is allowed to omit it, e.g. to query protocol capabilities
* without the need for an existing interface.
*
* @returns {null|LuCI.network.Protocol}
* Returns the instantiated protocol back-end class or `null` if the given
* protocol isn't known.
*/
getProtocol: function(protoname, netname) {
var v = _protocols[protoname];
if (v != null)
return new v(netname || '__dummy__');
return null;
},
/**
* Obtains instances of all known {@link LuCI.network.Protocol Protocol}
* back-end classes.
*
* @returns {Array<LuCI.network.Protocol>}
* Returns an array of protocol class instances.
*/
getProtocols: function() {
var rv = [];
for (var protoname in _protocols)
rv.push(new _protocols[protoname]('__dummy__'));
return rv;
},
/**
* Registers a new {@link LuCI.network.Protocol Protocol} subclass
* with the given methods and returns the resulting subclass value.
*
* This functions internally calls
* {@link LuCI.Class.extend Class.extend()} on the `Network.Protocol`
* base class.
*
* @param {string} protoname
* The name of the new protocol to register.
*
* @param {Object<string, *>} methods
* The member methods and values of the new `Protocol` subclass to
* be passed to {@link LuCI.Class.extend Class.extend()}.
*
* @returns {LuCI.network.Protocol}
* Returns the new `Protocol` subclass.
*/
registerProtocol: function(protoname, methods) {
var spec = L.isObject(_protospecs) ? _protospecs[protoname] : null;
var proto = Protocol.extend(Object.assign({
getI18n: function() {
return protoname;
},
isFloating: function() {
return false;
},
isVirtual: function() {
return (L.isObject(spec) && spec.no_device == true);
},
renderFormOptions: function(section) {
}
}, methods, {
__init__: function(name) {
this.sid = name;
},
getProtocol: function() {
return protoname;
}
}));
_protocols[protoname] = proto;
return proto;
},
/**
* Registers a new regular expression pattern to recognize
* virtual interfaces.
*
* @param {RegExp} pat
* A `RegExp` instance to match a virtual interface name
* such as `6in4-wan` or `tun0`.
*/
registerPatternVirtual: function(pat) {
iface_patterns_virtual.push(pat);
},
/**
* Registers a new human readable translation string for a `Protocol`
* error code.
*
* @param {string} code
* The `ubus` protocol error code to register a translation for, e.g.
* `NO_DEVICE`.
*
* @param {string} message
* The message to use as translation for the given protocol error code.
*
* @returns {boolean}
* Returns `true` if the error code description has been added or `false`
* if either the arguments were invalid or if there already was a
* description for the given code.
*/
registerErrorCode: function(code, message) {
if (typeof(code) == 'string' &&
typeof(message) == 'string' &&
!proto_errors.hasOwnProperty(code)) {
proto_errors[code] = message;
return true;
}
return false;
},
/**
* Adds a new network of the given name and update it with the given
* uci option values.
*
* If a network with the given name already exist but is empty, then
* this function will update its option, otherwise it will do nothing.
*
* @param {string} name
* The name of the network to add. Must be in the format `[a-zA-Z0-9_]+`.
*
* @param {Object<string, string|string[]>} [options]
* An object of uci option values to set on the new network or to
* update in an existing, empty network.
*
* @returns {Promise<null|LuCI.network.Protocol>}
* Returns a promise resolving to the `Protocol` subclass instance
* describing the added network or resolving to `null` if the name
* was invalid or if a non-empty network of the given name already
* existed.
*/
addNetwork: function(name, options) {
return this.getNetwork(name).then(L.bind(function(existingNetwork) {
if (name != null && /^[a-zA-Z0-9_]+$/.test(name) && existingNetwork == null) {
var sid = uci.add('network', 'interface', name);
if (sid != null) {
if (L.isObject(options))
for (var key in options)
if (options.hasOwnProperty(key))
uci.set('network', sid, key, options[key]);
return this.instantiateNetwork(sid);
}
}
else if (existingNetwork != null && existingNetwork.isEmpty()) {
if (L.isObject(options))
for (var key in options)
if (options.hasOwnProperty(key))
existingNetwork.set(key, options[key]);
return existingNetwork;
}
}, this));
},
/**
* Get a {@link LuCI.network.Protocol Protocol} instance describing
* the network with the given name.
*
* @param {string} name
* The logical interface name of the network get, e.g. `lan` or `wan`.
*
* @returns {Promise<null|LuCI.network.Protocol>}
* Returns a promise resolving to a
* {@link LuCI.network.Protocol Protocol} subclass instance describing
* the network or `null` if the network did not exist.
*/
getNetwork: function(name) {
return initNetworkState().then(L.bind(function() {
var section = (name != null) ? uci.get('network', name) : null;
if (section != null && section['.type'] == 'interface') {
return this.instantiateNetwork(name);
}
else if (name != null) {
for (var i = 0; i < _state.ifaces.length; i++)
if (_state.ifaces[i].interface == name)
return this.instantiateNetwork(name, _state.ifaces[i].proto);
}
return null;
}, this));
},
/**
* Gets an array containing all known networks.
*
* @returns {Promise<Array<LuCI.network.Protocol>>}
* Returns a promise resolving to a name-sorted array of
* {@link LuCI.network.Protocol Protocol} subclass instances
* describing all known networks.
*/
getNetworks: function() {
return initNetworkState().then(L.bind(enumerateNetworks, this));
},
/**
* Deletes the given network and its references from the network and
* firewall configuration.
*
* @param {string} name
* The name of the network to delete.
*
* @returns {Promise<boolean>}
* Returns a promise resolving to either `true` if the network and
* references to it were successfully deleted from the configuration or
* `false` if the given network could not be found.
*/
deleteNetwork: function(name) {
var requireFirewall = Promise.resolve(L.require('firewall')).catch(function() {}),
loadDHCP = L.resolveDefault(uci.load('dhcp')),
network = this.instantiateNetwork(name);
return Promise.all([ requireFirewall, loadDHCP, initNetworkState() ]).then(function(res) {
var uciInterface = uci.get('network', name),
firewall = res[0];
if (uciInterface != null && uciInterface['.type'] == 'interface') {
return Promise.resolve(network ? network.deleteConfiguration() : null).then(function() {
uci.remove('network', name);
uci.sections('luci', 'ifstate', function(s) {
if (s.interface == name)
uci.remove('luci', s['.name']);
});
uci.sections('network', null, function(s) {
switch (s['.type']) {
case 'alias':
case 'route':
case 'route6':
if (s.interface == name)
uci.remove('network', s['.name']);
break;
case 'rule':
case 'rule6':
if (s.in == name || s.out == name)
uci.remove('network', s['.name']);
break;
}
});
uci.sections('wireless', 'wifi-iface', function(s) {
var networks = L.toArray(s.network).filter(function(network) { return network != name });
if (networks.length > 0)
uci.set('wireless', s['.name'], 'network', networks.join(' '));
else
uci.unset('wireless', s['.name'], 'network');
});
uci.sections('dhcp', 'dhcp', function(s) {
if (s.interface == name)
uci.remove('dhcp', s['.name']);
});
if (firewall)
return firewall.deleteNetwork(name).then(function() { return true });
return true;
}).catch(function() {
return false;
});
}
return false;
});
},
/**
* Rename the given network and its references to a new name.
*
* @param {string} oldName
* The current name of the network.
*
* @param {string} newName
* The name to rename the network to, must be in the format
* `[a-z-A-Z0-9_]+`.
*
* @returns {Promise<boolean>}
* Returns a promise resolving to either `true` if the network was
* successfully renamed or `false` if the new name was invalid, if
* a network with the new name already exists or if the network to
* rename could not be found.
*/
renameNetwork: function(oldName, newName) {
return initNetworkState().then(function() {
if (newName == null || !/^[a-zA-Z0-9_]+$/.test(newName) || uci.get('network', newName) != null)
return false;
var oldNetwork = uci.get('network', oldName);
if (oldNetwork == null || oldNetwork['.type'] != 'interface')
return false;
var sid = uci.add('network', 'interface', newName);
for (var key in oldNetwork)
if (oldNetwork.hasOwnProperty(key) && key.charAt(0) != '.')
uci.set('network', sid, key, oldNetwork[key]);
uci.sections('luci', 'ifstate', function(s) {
if (s.interface == oldName)
uci.set('luci', s['.name'], 'interface', newName);
});
uci.sections('network', 'alias', function(s) {
if (s.interface == oldName)
uci.set('network', s['.name'], 'interface', newName);
});
uci.sections('network', 'route', function(s) {
if (s.interface == oldName)
uci.set('network', s['.name'], 'interface', newName);
});
uci.sections('network', 'route6', function(s) {
if (s.interface == oldName)
uci.set('network', s['.name'], 'interface', newName);
});
uci.sections('wireless', 'wifi-iface', function(s) {
var networks = L.toArray(s.network).map(function(network) { return (network == oldName ? newName : network) });
if (networks.length > 0)
uci.set('wireless', s['.name'], 'network', networks.join(' '));
});
uci.remove('network', oldName);
return true;
});
},
/**
* Get a {@link LuCI.network.Device Device} instance describing the
* given network device.
*
* @param {string} name
* The name of the network device to get, e.g. `eth0` or `br-lan`.
*
* @returns {Promise<null|LuCI.network.Device>}
* Returns a promise resolving to the `Device` instance describing
* the network device or `null` if the given device name could not
* be found.
*/
getDevice: function(name) {
return initNetworkState().then(L.bind(function() {
if (name == null)
return null;
if (_state.netdevs.hasOwnProperty(name))
return this.instantiateDevice(name);
var netid = getWifiNetidBySid(name);
if (netid != null)
return this.instantiateDevice(netid[0]);
return null;
}, this));
},
/**
* Get a sorted list of all found network devices.
*
* @returns {Promise<Array<LuCI.network.Device>>}
* Returns a promise resolving to a sorted array of `Device` class
* instances describing the network devices found on the system.
*/
getDevices: function() {
return initNetworkState().then(L.bind(function() {
var devices = {};
/* find simple devices */
var uciInterfaces = uci.sections('network', 'interface');
for (var i = 0; i < uciInterfaces.length; i++) {
var ifnames = L.toArray(uciInterfaces[i].ifname);
for (var j = 0; j < ifnames.length; j++) {
if (ifnames[j].charAt(0) == '@')
continue;
if (isIgnoredIfname(ifnames[j]) || isVirtualIfname(ifnames[j]) || isWifiIfname(ifnames[j]))
continue;
devices[ifnames[j]] = this.instantiateDevice(ifnames[j]);
}
}
for (var ifname in _state.netdevs) {
if (devices.hasOwnProperty(ifname))
continue;
if (isIgnoredIfname(ifname) || isWifiIfname(ifname))
continue;
if (_state.netdevs[ifname].wireless)
continue;
devices[ifname] = this.instantiateDevice(ifname);
}
/* find VLAN devices */
var uciSwitchVLANs = uci.sections('network', 'switch_vlan');
for (var i = 0; i < uciSwitchVLANs.length; i++) {
if (typeof(uciSwitchVLANs[i].ports) != 'string' ||
typeof(uciSwitchVLANs[i].device) != 'string' ||
!_state.switches.hasOwnProperty(uciSwitchVLANs[i].device))
continue;
var ports = uciSwitchVLANs[i].ports.split(/\s+/);
for (var j = 0; j < ports.length; j++) {
var m = ports[j].match(/^(\d+)([tu]?)$/);
if (m == null)
continue;
var netdev = _state.switches[uciSwitchVLANs[i].device].netdevs[m[1]];
if (netdev == null)
continue;
if (!devices.hasOwnProperty(netdev))
devices[netdev] = this.instantiateDevice(netdev);
_state.isSwitch[netdev] = true;
if (m[2] != 't')
continue;
var vid = uciSwitchVLANs[i].vid || uciSwitchVLANs[i].vlan;
vid = (vid != null ? +vid : null);
if (vid == null || vid < 0 || vid > 4095)
continue;
var vlandev = '%s.%d'.format(netdev, vid);
if (!devices.hasOwnProperty(vlandev))
devices[vlandev] = this.instantiateDevice(vlandev);
_state.isSwitch[vlandev] = true;
}
}
/* find bridge VLAN devices */
var uciBridgeVLANs = uci.sections('network', 'bridge-vlan');
for (var i = 0; i < uciBridgeVLANs.length; i++) {
var basedev = uciBridgeVLANs[i].device,
local = uciBridgeVLANs[i].local,
alias = uciBridgeVLANs[i].alias,
vid = +uciBridgeVLANs[i].vlan,
ports = L.toArray(uciBridgeVLANs[i].ports);
if (local == '0')
continue;
if (isNaN(vid) || vid < 0 || vid > 4095)
continue;
var vlandev = '%s.%s'.format(basedev, alias || vid);
_state.isBridge[basedev] = true;
if (!_state.bridges.hasOwnProperty(basedev))
_state.bridges[basedev] = {
name: basedev,
ifnames: []
};
if (!devices.hasOwnProperty(vlandev))
devices[vlandev] = this.instantiateDevice(vlandev);
ports.forEach(function(port_name) {
var m = port_name.match(/^([^:]+)(?::[ut*]+)?$/),
p = m ? m[1] : null;
if (!p)
return;
if (_state.bridges[basedev].ifnames.filter(function(sd) { return sd.name == p }).length)
return;
_state.netdevs[p] = _state.netdevs[p] || {
name: p,
ipaddrs: [],
ip6addrs: [],
type: 1,
devtype: 'ethernet',
stats: {},
flags: {}
};
_state.bridges[basedev].ifnames.push(_state.netdevs[p]);
_state.netdevs[p].bridge = _state.bridges[basedev];
});
}
/* find wireless interfaces */
var uciWifiIfaces = uci.sections('wireless', 'wifi-iface'),
networkCount = {};
for (var i = 0; i < uciWifiIfaces.length; i++) {
if (typeof(uciWifiIfaces[i].device) != 'string')
continue;
networkCount[uciWifiIfaces[i].device] = (networkCount[uciWifiIfaces[i].device] || 0) + 1;
var netid = '%s.network%d'.format(uciWifiIfaces[i].device, networkCount[uciWifiIfaces[i].device]);
devices[netid] = this.instantiateDevice(netid);
}
/* find uci declared devices */
var uciDevices = uci.sections('network', 'device');
for (var i = 0; i < uciDevices.length; i++) {
var type = uciDevices[i].type,
name = uciDevices[i].name;
if (!type || !name || devices.hasOwnProperty(name))
continue;
if (type == 'bridge')
_state.isBridge[name] = true;
devices[name] = this.instantiateDevice(name);
}
var rv = [];
for (var netdev in devices)
if (devices.hasOwnProperty(netdev))
rv.push(devices[netdev]);
rv.sort(deviceSort);
return rv;
}, this));
},
/**
* Test if a given network device name is in the list of patterns for
* device names to ignore.
*
* Ignored device names are usually Linux network devices which are
* spawned implicitly by kernel modules such as `tunl0` or `hwsim0`
* and which are unsuitable for use in network configuration.
*
* @param {string} name
* The device name to test.
*
* @returns {boolean}
* Returns `true` if the given name is in the ignore pattern list,
* else returns `false`.
*/
isIgnoredDevice: function(name) {
return isIgnoredIfname(name);
},
/**
* Get a {@link LuCI.network.WifiDevice WifiDevice} instance describing
* the given wireless radio.
*
* @param {string} devname
* The configuration name of the wireless radio to look up, e.g. `radio0`
* for the first mac80211 phy on the system.
*
* @returns {Promise<null|LuCI.network.WifiDevice>}
* Returns a promise resolving to the `WifiDevice` instance describing
* the underlying radio device or `null` if the wireless radio could not
* be found.
*/
getWifiDevice: function(devname) {
return initNetworkState().then(L.bind(function() {
var existingDevice = uci.get('wireless', devname);
if (existingDevice == null || existingDevice['.type'] != 'wifi-device')
return null;
return this.instantiateWifiDevice(devname, _state.radios[devname] || {});
}, this));
},
/**
* Obtain a list of all configured radio devices.
*
* @returns {Promise<Array<LuCI.network.WifiDevice>>}
* Returns a promise resolving to an array of `WifiDevice` instances
* describing the wireless radios configured in the system.
* The order of the array corresponds to the order of the radios in
* the configuration.
*/
getWifiDevices: function() {
return initNetworkState().then(L.bind(function() {
var uciWifiDevices = uci.sections('wireless', 'wifi-device'),
rv = [];
for (var i = 0; i < uciWifiDevices.length; i++) {
var devname = uciWifiDevices[i]['.name'];
rv.push(this.instantiateWifiDevice(devname, _state.radios[devname] || {}));
}
return rv;
}, this));
},
/**
* Get a {@link LuCI.network.WifiNetwork WifiNetwork} instance describing
* the given wireless network.
*
* @param {string} netname
* The name of the wireless network to look up. This may be either an uci
* configuration section ID, a network ID in the form `radio#.network#`
* or a Linux network device name like `wlan0` which is resolved to the
* corresponding configuration section through `ubus` runtime information.
*
* @returns {Promise<null|LuCI.network.WifiNetwork>}
* Returns a promise resolving to the `WifiNetwork` instance describing
* the wireless network or `null` if the corresponding network could not
* be found.
*/
getWifiNetwork: function(netname) {
return initNetworkState()
.then(L.bind(this.lookupWifiNetwork, this, netname));
},
/**
* Get an array of all {@link LuCI.network.WifiNetwork WifiNetwork}
* instances describing the wireless networks present on the system.
*
* @returns {Promise<Array<LuCI.network.WifiNetwork>>}
* Returns a promise resolving to an array of `WifiNetwork` instances
* describing the wireless networks. The array will be empty if no networks
* are found.
*/
getWifiNetworks: function() {
return initNetworkState().then(L.bind(function() {
var wifiIfaces = uci.sections('wireless', 'wifi-iface'),
rv = [];
for (var i = 0; i < wifiIfaces.length; i++)
rv.push(this.lookupWifiNetwork(wifiIfaces[i]['.name']));
rv.sort(function(a, b) {
return L.naturalCompare(a.getID(), b.getID());
});
return rv;
}, this));
},
/**
* Adds a new wireless network to the configuration and sets its options
* to the provided values.
*
* @param {Object<string, string|string[]>} options
* The options to set for the newly added wireless network. This object
* must at least contain a `device` property which is set to the radio
* name the new network belongs to.
*
* @returns {Promise<null|LuCI.network.WifiNetwork>}
* Returns a promise resolving to a `WifiNetwork` instance describing
* the newly added wireless network or `null` if the given options
* were invalid or if the associated radio device could not be found.
*/
addWifiNetwork: function(options) {
return initNetworkState().then(L.bind(function() {
if (options == null ||
typeof(options) != 'object' ||
typeof(options.device) != 'string')
return null;
var existingDevice = uci.get('wireless', options.device);
if (existingDevice == null || existingDevice['.type'] != 'wifi-device')
return null;
/* XXX: need to add a named section (wifinet#) here */
var sid = uci.add('wireless', 'wifi-iface');
for (var key in options)
if (options.hasOwnProperty(key))
uci.set('wireless', sid, key, options[key]);
var radioname = existingDevice['.name'],
netid = getWifiNetidBySid(sid) || [];
return this.instantiateWifiNetwork(sid, radioname, _state.radios[radioname], netid[0], null);
}, this));
},
/**
* Deletes the given wireless network from the configuration.
*
* @param {string} netname
* The name of the network to remove. This may be either a
* network ID in the form `radio#.network#` or a Linux network device
* name like `wlan0` which is resolved to the corresponding configuration
* section through `ubus` runtime information.
*
* @returns {Promise<boolean>}
* Returns a promise resolving to `true` if the wireless network has been
* successfully deleted from the configuration or `false` if it could not
* be found.
*/
deleteWifiNetwork: function(netname) {
return initNetworkState().then(L.bind(function() {
var sid = getWifiSidByIfname(netname);
if (sid == null)
return false;
uci.remove('wireless', sid);
return true;
}, this));
},
/* private */
getStatusByRoute: function(addr, mask) {
return initNetworkState().then(L.bind(function() {
var rv = [];
for (var i = 0; i < _state.ifaces.length; i++) {
if (!Array.isArray(_state.ifaces[i].route))
continue;
for (var j = 0; j < _state.ifaces[i].route.length; j++) {
if (typeof(_state.ifaces[i].route[j]) != 'object' ||
typeof(_state.ifaces[i].route[j].target) != 'string' ||
typeof(_state.ifaces[i].route[j].mask) != 'number')
continue;
if (_state.ifaces[i].route[j].table)
continue;
if (_state.ifaces[i].route[j].target != addr ||
_state.ifaces[i].route[j].mask != mask)
continue;
rv.push(_state.ifaces[i]);
}
}
rv.sort(function(a, b) {
return L.naturalCompare(a.metric, b.metric) || L.naturalCompare(a.interface, b.interface);
});
return rv;
}, this));
},
/* private */
getStatusByAddress: function(addr) {
return initNetworkState().then(L.bind(function() {
var rv = [];
for (var i = 0; i < _state.ifaces.length; i++) {
if (Array.isArray(_state.ifaces[i]['ipv4-address']))
for (var j = 0; j < _state.ifaces[i]['ipv4-address'].length; j++)
if (typeof(_state.ifaces[i]['ipv4-address'][j]) == 'object' &&
_state.ifaces[i]['ipv4-address'][j].address == addr)
return _state.ifaces[i];
if (Array.isArray(_state.ifaces[i]['ipv6-address']))
for (var j = 0; j < _state.ifaces[i]['ipv6-address'].length; j++)
if (typeof(_state.ifaces[i]['ipv6-address'][j]) == 'object' &&
_state.ifaces[i]['ipv6-address'][j].address == addr)
return _state.ifaces[i];
if (Array.isArray(_state.ifaces[i]['ipv6-prefix-assignment']))
for (var j = 0; j < _state.ifaces[i]['ipv6-prefix-assignment'].length; j++)
if (typeof(_state.ifaces[i]['ipv6-prefix-assignment'][j]) == 'object' &&
typeof(_state.ifaces[i]['ipv6-prefix-assignment'][j]['local-address']) == 'object' &&
_state.ifaces[i]['ipv6-prefix-assignment'][j]['local-address'].address == addr)
return _state.ifaces[i];
}
return null;
}, this));
},
/**
* Get IPv4 wan networks.
*
* This function looks up all networks having a default `0.0.0.0/0` route
* and returns them as array.
*
* @returns {Promise<Array<LuCI.network.Protocol>>}
* Returns a promise resolving to an array of `Protocol` subclass
* instances describing the found default route interfaces.
*/
getWANNetworks: function() {
return this.getStatusByRoute('0.0.0.0', 0).then(L.bind(function(statuses) {
var rv = [], seen = {};
for (var i = 0; i < statuses.length; i++) {
if (!seen.hasOwnProperty(statuses[i].interface)) {
rv.push(this.instantiateNetwork(statuses[i].interface, statuses[i].proto));
seen[statuses[i].interface] = true;
}
}
return rv;
}, this));
},
/**
* Get IPv6 wan networks.
*
* This function looks up all networks having a default `::/0` route
* and returns them as array.
*
* @returns {Promise<Array<LuCI.network.Protocol>>}
* Returns a promise resolving to an array of `Protocol` subclass
* instances describing the found IPv6 default route interfaces.
*/
getWAN6Networks: function() {
return this.getStatusByRoute('::', 0).then(L.bind(function(statuses) {
var rv = [], seen = {};
for (var i = 0; i < statuses.length; i++) {
if (!seen.hasOwnProperty(statuses[i].interface)) {
rv.push(this.instantiateNetwork(statuses[i].interface, statuses[i].proto));
seen[statuses[i].interface] = true;
}
}
return rv;
}, this));
},
/**
* Describes a swconfig switch topology by specifying the CPU
* connections and external port labels of a switch.
*
* @typedef {Object<string, Object|Array>} SwitchTopology
* @memberof LuCI.network
*
* @property {Object<number, string>} netdevs
* The `netdevs` property points to an object describing the CPU port
* connections of the switch. The numeric key of the enclosed object is
* the port number, the value contains the Linux network device name the
* port is hardwired to.
*
* @property {Array<Object<string, boolean|number|string>>} ports
* The `ports` property points to an array describing the populated
* ports of the switch in the external label order. Each array item is
* an object containing the following keys:
* - `num` - the internal switch port number
* - `label` - the label of the port, e.g. `LAN 1` or `CPU (eth0)`
* - `device` - the connected Linux network device name (CPU ports only)
* - `tagged` - a boolean indicating whether the port must be tagged to
* function (CPU ports only)
*/
/**
* Returns the topologies of all swconfig switches found on the system.
*
* @returns {Promise<Object<string, LuCI.network.SwitchTopology>>}
* Returns a promise resolving to an object containing the topologies
* of each switch. The object keys correspond to the name of the switches
* such as `switch0`, the values are
* {@link LuCI.network.SwitchTopology SwitchTopology} objects describing
* the layout.
*/
getSwitchTopologies: function() {
return initNetworkState().then(function() {
return _state.switches;
});
},
/* private */
instantiateNetwork: function(name, proto) {
if (name == null)
return null;
proto = (proto == null ? uci.get('network', name, 'proto') : proto);
var protoClass = _protocols[proto] || Protocol;
return new protoClass(name);
},
/* private */
instantiateDevice: function(name, network, extend) {
if (extend != null)
return new (Device.extend(extend))(name, network);
return new Device(name, network);
},
/* private */
instantiateWifiDevice: function(radioname, radiostate) {
return new WifiDevice(radioname, radiostate);
},
/* private */
instantiateWifiNetwork: function(sid, radioname, radiostate, netid, netstate, hostapd) {
return new WifiNetwork(sid, radioname, radiostate, netid, netstate, hostapd);
},
/* private */
lookupWifiNetwork: function(netname) {
var sid, res, netid, radioname, radiostate, netstate;
sid = getWifiSidByNetid(netname);
if (sid != null) {
res = getWifiStateBySid(sid);
netid = netname;
radioname = res ? res[0] : null;
radiostate = res ? res[1] : null;
netstate = res ? res[2] : null;
}
else {
res = getWifiStateByIfname(netname);
if (res != null) {
radioname = res[0];
radiostate = res[1];
netstate = res[2];
sid = netstate.section;
netid = L.toArray(getWifiNetidBySid(sid))[0];
}
else {
res = getWifiStateBySid(netname);
if (res != null) {
radioname = res[0];
radiostate = res[1];
netstate = res[2];
sid = netname;
netid = L.toArray(getWifiNetidBySid(sid))[0];
}
else {
res = getWifiNetidBySid(netname);
if (res != null) {
netid = res[0];
radioname = res[1];
sid = netname;
}
}
}
}
return this.instantiateWifiNetwork(sid || netname, radioname,
radiostate, netid, netstate,
netstate ? _state.hostapd[netstate.ifname] : null);
},
/**
* Obtains the network device name of the given object.
*
* @param {LuCI.network.Protocol|LuCI.network.Device|LuCI.network.WifiDevice|LuCI.network.WifiNetwork|string} obj
* The object to get the device name from.
*
* @returns {null|string}
* Returns a string containing the device name or `null` if the given
* object could not be converted to a name.
*/
getIfnameOf: function(obj) {
return ifnameOf(obj);
},
/**
* Queries the internal DSL modem type from board information.
*
* @returns {Promise<null|string>}
* Returns a promise resolving to the type of the internal modem
* (e.g. `vdsl`) or to `null` if no internal modem is present.
*/
getDSLModemType: function() {
return initNetworkState().then(function() {
return _state.hasDSLModem ? _state.hasDSLModem.type : null;
});
},
/**
* Queries aggregated information about known hosts.
*
* This function aggregates information from various sources such as
* DHCP lease databases, ARP and IPv6 neighbour entries, wireless
* association list etc. and returns a {@link LuCI.network.Hosts Hosts}
* class instance describing the found hosts.
*
* @returns {Promise<LuCI.network.Hosts>}
* Returns a `Hosts` instance describing host known on the system.
*/
getHostHints: function() {
return initNetworkState().then(function() {
return new Hosts(_state.hosts);
});
}
});
/**
* @class
* @memberof LuCI.network
* @hideconstructor
* @classdesc
*
* The `LuCI.network.Hosts` class encapsulates host information aggregated
* from multiple sources and provides convenience functions to access the
* host information by different criteria.
*/
Hosts = baseclass.extend(/** @lends LuCI.network.Hosts.prototype */ {
__init__: function(hosts) {
this.hosts = hosts;
},
/**
* Look up the hostname associated with the given MAC address.
*
* @param {string} mac
* The MAC address to look up.
*
* @returns {null|string}
* Returns the hostname associated with the given MAC or `null` if
* no matching host could be found or if no hostname is known for
* the corresponding host.
*/
getHostnameByMACAddr: function(mac) {
return this.hosts[mac]
? (this.hosts[mac].name || null)
: null;
},
/**
* Look up the IPv4 address associated with the given MAC address.
*
* @param {string} mac
* The MAC address to look up.
*
* @returns {null|string}
* Returns the IPv4 address associated with the given MAC or `null` if
* no matching host could be found or if no IPv4 address is known for
* the corresponding host.
*/
getIPAddrByMACAddr: function(mac) {
return this.hosts[mac]
? (L.toArray(this.hosts[mac].ipaddrs || this.hosts[mac].ipv4)[0] || null)
: null;
},
/**
* Look up the IPv6 address associated with the given MAC address.
*
* @param {string} mac
* The MAC address to look up.
*
* @returns {null|string}
* Returns the IPv6 address associated with the given MAC or `null` if
* no matching host could be found or if no IPv6 address is known for
* the corresponding host.
*/
getIP6AddrByMACAddr: function(mac) {
return this.hosts[mac]
? (L.toArray(this.hosts[mac].ip6addrs || this.hosts[mac].ipv6)[0] || null)
: null;
},
/**
* Look up the hostname associated with the given IPv4 address.
*
* @param {string} ipaddr
* The IPv4 address to look up.
*
* @returns {null|string}
* Returns the hostname associated with the given IPv4 or `null` if
* no matching host could be found or if no hostname is known for
* the corresponding host.
*/
getHostnameByIPAddr: function(ipaddr) {
for (var mac in this.hosts) {
if (this.hosts[mac].name == null)
continue;
var addrs = L.toArray(this.hosts[mac].ipaddrs || this.hosts[mac].ipv4);
for (var i = 0; i < addrs.length; i++)
if (addrs[i] == ipaddr)
return this.hosts[mac].name;
}
return null;
},
/**
* Look up the MAC address associated with the given IPv4 address.
*
* @param {string} ipaddr
* The IPv4 address to look up.
*
* @returns {null|string}
* Returns the MAC address associated with the given IPv4 or `null` if
* no matching host could be found or if no MAC address is known for
* the corresponding host.
*/
getMACAddrByIPAddr: function(ipaddr) {
for (var mac in this.hosts) {
var addrs = L.toArray(this.hosts[mac].ipaddrs || this.hosts[mac].ipv4);
for (var i = 0; i < addrs.length; i++)
if (addrs[i] == ipaddr)
return mac;
}
return null;
},
/**
* Look up the hostname associated with the given IPv6 address.
*
* @param {string} ip6addr
* The IPv6 address to look up.
*
* @returns {null|string}
* Returns the hostname associated with the given IPv6 or `null` if
* no matching host could be found or if no hostname is known for
* the corresponding host.
*/
getHostnameByIP6Addr: function(ip6addr) {
for (var mac in this.hosts) {
if (this.hosts[mac].name == null)
continue;
var addrs = L.toArray(this.hosts[mac].ip6addrs || this.hosts[mac].ipv6);
for (var i = 0; i < addrs.length; i++)
if (addrs[i] == ip6addr)
return this.hosts[mac].name;
}
return null;
},
/**
* Look up the MAC address associated with the given IPv6 address.
*
* @param {string} ip6addr
* The IPv6 address to look up.
*
* @returns {null|string}
* Returns the MAC address associated with the given IPv6 or `null` if
* no matching host could be found or if no MAC address is known for
* the corresponding host.
*/
getMACAddrByIP6Addr: function(ip6addr) {
for (var mac in this.hosts) {
var addrs = L.toArray(this.hosts[mac].ip6addrs || this.hosts[mac].ipv6);
for (var i = 0; i < addrs.length; i++)
if (addrs[i] == ip6addr)
return mac;
}
return null;
},
/**
* Return an array of (MAC address, name hint) tuples sorted by
* MAC address.
*
* @param {boolean} [preferIp6=false]
* Whether to prefer IPv6 addresses (`true`) or IPv4 addresses (`false`)
* as name hint when no hostname is known for a specific MAC address.
*
* @returns {Array<Array<string>>}
* Returns an array of arrays containing a name hint for each found
* MAC address on the system. The array is sorted ascending by MAC.
*
* Each item of the resulting array is a two element array with the
* MAC being the first element and the name hint being the second
* element. The name hint is either the hostname, an IPv4 or an IPv6
* address related to the MAC address.
*
* If no hostname but both IPv4 and IPv6 addresses are known, the
* `preferIP6` flag specifies whether the IPv6 or the IPv4 address
* is used as hint.
*/
getMACHints: function(preferIp6) {
var rv = [];
for (var mac in this.hosts) {
var hint = this.hosts[mac].name ||
L.toArray(this.hosts[mac][preferIp6 ? 'ip6addrs' : 'ipaddrs'] || this.hosts[mac][preferIp6 ? 'ipv6' : 'ipv4'])[0] ||
L.toArray(this.hosts[mac][preferIp6 ? 'ipaddrs' : 'ip6addrs'] || this.hosts[mac][preferIp6 ? 'ipv4' : 'ipv6'])[0];
rv.push([mac, hint]);
}
return rv.sort(function(a, b) {
return L.naturalCompare(a[0], b[0]);
});
}
});
/**
* @class
* @memberof LuCI.network
* @hideconstructor
* @classdesc
*
* The `Network.Protocol` class serves as base for protocol specific
* subclasses which describe logical UCI networks defined by `config
* interface` sections in `/etc/config/network`.
*/
Protocol = baseclass.extend(/** @lends LuCI.network.Protocol.prototype */ {
__init__: function(name) {
this.sid = name;
},
_get: function(opt) {
var val = uci.get('network', this.sid, opt);
if (Array.isArray(val))
return val.join(' ');
return val || '';
},
_ubus: function(field) {
for (var i = 0; i < _state.ifaces.length; i++) {
if (_state.ifaces[i].interface != this.sid)
continue;
return (field != null ? _state.ifaces[i][field] : _state.ifaces[i]);
}
},
/**
* Read the given UCI option value of this network.
*
* @param {string} opt
* The UCI option name to read.
*
* @returns {null|string|string[]}
* Returns the UCI option value or `null` if the requested option is
* not found.
*/
get: function(opt) {
return uci.get('network', this.sid, opt);
},
/**
* Set the given UCI option of this network to the given value.
*
* @param {string} opt
* The name of the UCI option to set.
*
* @param {null|string|string[]} val
* The value to set or `null` to remove the given option from the
* configuration.
*/
set: function(opt, val) {
return uci.set('network', this.sid, opt, val);
},
/**
* Get the associated Linux network device of this network.
*
* @returns {null|string}
* Returns the name of the associated network device or `null` if
* it could not be determined.
*/
getIfname: function() {
var ifname;
if (this.isFloating())
ifname = this._ubus('l3_device');
else
ifname = this._ubus('device') || this._ubus('l3_device');
if (ifname != null)
return ifname;
var res = getWifiNetidByNetname(this.sid);
return (res != null ? res[0] : null);
},
/**
* Get the name of this network protocol class.
*
* This function will be overwritten by subclasses created by
* {@link LuCI.network#registerProtocol Network.registerProtocol()}.
*
* @abstract
* @returns {string}
* Returns the name of the network protocol implementation, e.g.
* `static` or `dhcp`.
*/
getProtocol: function() {
return null;
},
/**
* Return a human readable description for the protocol, such as
* `Static address` or `DHCP client`.
*
* This function should be overwritten by subclasses.
*
* @abstract
* @returns {string}
* Returns the description string.
*/
getI18n: function() {
switch (this.getProtocol()) {
case 'none': return _('Unmanaged');
case 'static': return _('Static address');
case 'dhcp': return _('DHCP client');
default: return _('Unknown');
}
},
/**
* Get the type of the underlying interface.
*
* This function actually is a convenience wrapper around
* `proto.get("type")` and is mainly used by other `LuCI.network` code
* to check whether the interface is declared as bridge in UCI.
*
* @returns {null|string}
* Returns the value of the `type` option of the associated logical
* interface or `null` if no `type` option is set.
*/
getType: function() {
return this._get('type');
},
/**
* Get the name of the associated logical interface.
*
* @returns {string}
* Returns the logical interface name, such as `lan` or `wan`.
*/
getName: function() {
return this.sid;
},
/**
* Get the uptime of the logical interface.
*
* @returns {number}
* Returns the uptime of the associated interface in seconds.
*/
getUptime: function() {
return this._ubus('uptime') || 0;
},
/**
* Get the logical interface expiry time in seconds.
*
* For protocols that have a concept of a lease, such as DHCP or
* DHCPv6, this function returns the remaining time in seconds
* until the lease expires.
*
* @returns {number}
* Returns the amount of seconds until the lease expires or `-1`
* if it isn't applicable to the associated protocol.
*/
getExpiry: function() {
var u = this._ubus('uptime'),
d = this._ubus('data'),
v6_prefixes = this._ubus('ipv6-prefix'),
v6_addresses = this._ubus('ipv6-address');
if (typeof(u) == 'number' && d != null) {
// DHCPv4 or leasetime in data
if(typeof(d) == 'object' && typeof(d.leasetime) == 'number') {
var r = d.leasetime - (u % d.leasetime);
return (r > 0 ? r : 0);
}
// DHCPv6, we can have multiple IPs and prefixes
if (Array.isArray(v6_prefixes) || Array.isArray(v6_addresses)) {
var prefixes = [...v6_prefixes, ...v6_addresses];
if(prefixes.length && typeof(prefixes[0].valid) == 'number') {
var r = prefixes[0].valid;
return (r > 0 ? r : 0);
}
}
}
return -1;
},
/**
* Get the metric value of the logical interface.
*
* @returns {number}
* Returns the current metric value used for device and network
* routes spawned by the associated logical interface.
*/
getMetric: function() {
return this._ubus('metric') || 0;
},
/**
* Get the requested firewall zone name of the logical interface.
*
* Some protocol implementations request a specific firewall zone
* to trigger inclusion of their resulting network devices into the
* firewall rule set.
*
* @returns {null|string}
* Returns the requested firewall zone name as published in the
* `ubus` runtime information or `null` if the remote protocol
* handler didn't request a zone.
*/
getZoneName: function() {
var d = this._ubus('data');
if (L.isObject(d) && typeof(d.zone) == 'string')
return d.zone;
return null;
},
/**
* Query the first (primary) IPv4 address of the logical interface.
*
* @returns {null|string}
* Returns the primary IPv4 address registered by the protocol handler
* or `null` if no IPv4 addresses were set.
*/
getIPAddr: function() {
var addrs = this._ubus('ipv4-address');
return ((Array.isArray(addrs) && addrs.length) ? addrs[0].address : null);
},
/**
* Query all IPv4 addresses of the logical interface.
*
* @returns {string[]}
* Returns an array of IPv4 addresses in CIDR notation which have been
* registered by the protocol handler. The order of the resulting array
* follows the order of the addresses in `ubus` runtime information.
*/
getIPAddrs: function() {
var addrs = this._ubus('ipv4-address'),
rv = [];
if (Array.isArray(addrs))
for (var i = 0; i < addrs.length; i++)
rv.push('%s/%d'.format(addrs[i].address, addrs[i].mask));
return rv;
},
/**
* Query the first (primary) IPv4 netmask of the logical interface.
*
* @returns {null|string}
* Returns the netmask of the primary IPv4 address registered by the
* protocol handler or `null` if no IPv4 addresses were set.
*/
getNetmask: function() {
var addrs = this._ubus('ipv4-address');
if (Array.isArray(addrs) && addrs.length)
return prefixToMask(addrs[0].mask, false);
},
/**
* Query the gateway (nexthop) of the default route associated with
* this logical interface.
*
* @returns {string}
* Returns a string containing the IPv4 nexthop address of the associated
* default route or `null` if no default route was found.
*/
getGatewayAddr: function() {
var routes = this._ubus('route');
if (Array.isArray(routes))
for (var i = 0; i < routes.length; i++)
if (typeof(routes[i]) == 'object' &&
routes[i].target == '0.0.0.0' &&
routes[i].mask == 0)
return routes[i].nexthop;
return null;
},
/**
* Query the IPv4 DNS servers associated with the logical interface.
*
* @returns {string[]}
* Returns an array of IPv4 DNS servers registered by the remote
* protocol back-end.
*/
getDNSAddrs: function() {
var addrs = this._ubus('dns-server'),
rv = [];
if (Array.isArray(addrs))
for (var i = 0; i < addrs.length; i++)
if (!/:/.test(addrs[i]))
rv.push(addrs[i]);
return rv;
},
/**
* Query the first (primary) IPv6 address of the logical interface.
*
* @returns {null|string}
* Returns the primary IPv6 address registered by the protocol handler
* in CIDR notation or `null` if no IPv6 addresses were set.
*/
getIP6Addr: function() {
var addrs = this._ubus('ipv6-address');
if (Array.isArray(addrs) && L.isObject(addrs[0]))
return '%s/%d'.format(addrs[0].address, addrs[0].mask);
addrs = this._ubus('ipv6-prefix-assignment');
if (Array.isArray(addrs) && L.isObject(addrs[0]) && L.isObject(addrs[0]['local-address']))
return '%s/%d'.format(addrs[0]['local-address'].address, addrs[0]['local-address'].mask);
return null;
},
/**
* Query all IPv6 addresses of the logical interface.
*
* @returns {string[]}
* Returns an array of IPv6 addresses in CIDR notation which have been
* registered by the protocol handler. The order of the resulting array
* follows the order of the addresses in `ubus` runtime information.
*/
getIP6Addrs: function() {
var addrs = this._ubus('ipv6-address'),
rv = [];
if (Array.isArray(addrs))
for (var i = 0; i < addrs.length; i++)
if (L.isObject(addrs[i]))
rv.push('%s/%d'.format(addrs[i].address, addrs[i].mask));
addrs = this._ubus('ipv6-prefix-assignment');
if (Array.isArray(addrs))
for (var i = 0; i < addrs.length; i++)
if (L.isObject(addrs[i]) && L.isObject(addrs[i]['local-address']))
rv.push('%s/%d'.format(addrs[i]['local-address'].address, addrs[i]['local-address'].mask));
return rv;
},
/**
* Query the gateway (nexthop) of the IPv6 default route associated with
* this logical interface.
*
* @returns {string}
* Returns a string containing the IPv6 nexthop address of the associated
* default route or `null` if no default route was found.
*/
getGateway6Addr: function() {
var routes = this._ubus('route');
if (Array.isArray(routes))
for (var i = 0; i < routes.length; i++)
if (typeof(routes[i]) == 'object' &&
routes[i].target == '::' &&
routes[i].mask == 0)
return routes[i].nexthop;
return null;
},
/**
* Query the IPv6 DNS servers associated with the logical interface.
*
* @returns {string[]}
* Returns an array of IPv6 DNS servers registered by the remote
* protocol back-end.
*/
getDNS6Addrs: function() {
var addrs = this._ubus('dns-server'),
rv = [];
if (Array.isArray(addrs))
for (var i = 0; i < addrs.length; i++)
if (/:/.test(addrs[i]))
rv.push(addrs[i]);
return rv;
},
/**
* Query the routed IPv6 prefix associated with the logical interface.
*
* @returns {null|string}
* Returns the routed IPv6 prefix registered by the remote protocol
* handler or `null` if no prefix is present.
*/
getIP6Prefix: function() {
var prefixes = this._ubus('ipv6-prefix');
if (Array.isArray(prefixes) && L.isObject(prefixes[0]))
return '%s/%d'.format(prefixes[0].address, prefixes[0].mask);
return null;
},
/**
* Query the routed IPv6 prefixes associated with the logical interface.
*
* @returns {null|string[]}
* Returns an array of the routed IPv6 prefixes registered by the remote
* protocol handler or `null` if no prefixes are present.
*/
getIP6Prefixes: function() {
var prefixes = this._ubus('ipv6-prefix');
var rv = [];
if (Array.isArray(prefixes))
for (var i = 0; i < prefixes.length; i++)
if (L.isObject(prefixes[i]))
rv.push('%s/%d'.format(prefixes[i].address, prefixes[i].mask));
return rv.length > 0 ? rv: null;
},
/**
* Query interface error messages published in `ubus` runtime state.
*
* Interface errors are emitted by remote protocol handlers if the setup
* of the underlying logical interface failed, e.g. due to bad
* configuration or network connectivity issues.
*
* This function will translate the found error codes to human readable
* messages using the descriptions registered by
* {@link LuCI.network#registerErrorCode Network.registerErrorCode()}
* and fall back to `"Unknown error (%s)"` where `%s` is replaced by the
* error code in case no translation can be found.
*
* @returns {string[]}
* Returns an array of translated interface error messages.
*/
getErrors: function() {
var errors = this._ubus('errors'),
rv = null;
if (Array.isArray(errors)) {
for (var i = 0; i < errors.length; i++) {
if (!L.isObject(errors[i]) || typeof(errors[i].code) != 'string')
continue;
rv = rv || [];
rv.push(proto_errors[errors[i].code] || _('Unknown error (%s)').format(errors[i].code));
}
}
return rv;
},
/**
* Checks whether the underlying logical interface is declared as bridge.
*
* @returns {boolean}
* Returns `true` when the interface is declared with `option type bridge`
* and when the associated protocol implementation is not marked virtual
* or `false` when the logical interface is no bridge.
*/
isBridge: function() {
return (!this.isVirtual() && this.getType() == 'bridge');
},
/**
* Gets the name of the package providing the protocol functionality. The
* package is available via the system default package manager. This is used
* when a config refers to a protocol handler which is not yet installed.
*
* This function should be overwritten by protocol specific subclasses.
*
* @abstract
*
* @returns {string}
* Returns the name of the package to download, required for the protocol to
* function, e.g. `odhcp6c` for the `dhcpv6` protocol.
*/
getPackageName: function() {
return null;
},
/**
* Check function for the protocol handler if a new interface is creatable.
*
* This function should be overwritten by protocol specific subclasses.
*
* @abstract
*
* @param {string} ifname
* The name of the interface to be created.
*
* @returns {Promise<void>}
* Returns a promise resolving if new interface is creatable, else
* rejects with an error message string.
*/
isCreateable: function(ifname) {
return Promise.resolve(null);
},
/**
* Checks whether the protocol functionality is installed.
*
* This function exists for compatibility with old code, it always
* returns `true`.
*
* @deprecated
* @abstract
*
* @returns {boolean}
* Returns `true` if the protocol support is installed, else `false`.
*/
isInstalled: function() {
return true;
},
/**
* Checks whether this protocol is "virtual".
*
* A "virtual" protocol is a protocol which spawns its own interfaces
* on demand instead of using existing physical interfaces.
*
* Examples for virtual protocols are `6in4` which `gre` spawn tunnel
* network device on startup, examples for non-virtual protocols are
* `dhcp` or `static` which apply IP configuration to existing interfaces.
*
* This function should be overwritten by subclasses.
*
* @returns {boolean}
* Returns a boolean indicating whether the underlying protocol spawns
* dynamic interfaces (`true`) or not (`false`).
*/
isVirtual: function() {
return false;
},
/**
* Checks whether this protocol is "floating".
*
* A "floating" protocol is a protocol which spawns its own interfaces
* on demand, like a virtual one but which relies on an existing lower
* level interface to initiate the connection.
*
* An example for such a protocol is "pppoe".
*
* This function exists for backwards compatibility with older code
* but should not be used anymore.
*
* @deprecated
* @returns {boolean}
* Returns a boolean indicating whether this protocol is floating (`true`)
* or not (`false`).
*/
isFloating: function() {
return false;
},
/**
* Checks whether this logical interface is dynamic.
*
* A dynamic interface is an interface which has been created at runtime,
* e.g. as sub-interface of another interface, but which is not backed by
* any user configuration. Such dynamic interfaces cannot be edited but
* only brought down or restarted.
*
* @returns {boolean}
* Returns a boolean indicating whether this interface is dynamic (`true`)
* or not (`false`).
*/
isDynamic: function() {
return (this._ubus('dynamic') == true);
},
/**
* Checks whether this interface is an alias interface.
*
* Alias interfaces are interfaces layering on top of another interface
* and are denoted by a special `@interfacename` notation in the
* underlying `device` option.
*
* @returns {null|string}
* Returns the name of the parent interface if this logical interface
* is an alias or `null` if it is not an alias interface.
*/
isAlias: function() {
var ifnames = L.toArray(uci.get('network', this.sid, 'device')),
parent = null;
for (var i = 0; i < ifnames.length; i++)
if (ifnames[i].charAt(0) == '@')
parent = ifnames[i].substr(1);
else if (parent != null)
parent = null;
return parent;
},
/**
* Checks whether this logical interface is "empty", where empty means that it
* has no network devices attached.
*
* @returns {boolean}
* Returns `true` if this logical interface is empty, else `false`.
*/
isEmpty: function() {
if (this.isFloating())
return false;
var empty = true,
device = this._get('device');
if (device != null && device.match(/\S+/))
empty = false;
if (empty == true && getWifiNetidBySid(this.sid) != null)
empty = false;
return empty;
},
/**
* Checks whether this logical interface is configured and running.
*
* @returns {boolean}
* Returns `true` when the interface is active or `false` when it is not.
*/
isUp: function() {
return (this._ubus('up') == true);
},
/**
* Add the given network device to the logical interface.
*
* @param {LuCI.network.Protocol|LuCI.network.Device|LuCI.network.WifiDevice|LuCI.network.WifiNetwork|string} device
* The object or device name to add to the logical interface. In case the
* given argument is not a string, it is resolved though the
* {@link LuCI.network#getIfnameOf Network.getIfnameOf()} function.
*
* @returns {boolean}
* Returns `true` if the device name has been added or `false` if any
* argument was invalid, if the device was already part of the logical
* interface or if the logical interface is virtual.
*/
addDevice: function(device) {
device = ifnameOf(device);
if (device == null || this.isFloating())
return false;
var wif = getWifiSidByIfname(device);
if (wif != null)
return appendValue('wireless', wif, 'network', this.sid);
return appendValue('network', this.sid, 'device', device);
},
/**
* Remove the given network device from the logical interface.
*
* @param {LuCI.network.Protocol|LuCI.network.Device|LuCI.network.WifiDevice|LuCI.network.WifiNetwork|string} device
* The object or device name to remove from the logical interface. In case
* the given argument is not a string, it is resolved though the
* {@link LuCI.network#getIfnameOf Network.getIfnameOf()} function.
*
* @returns {boolean}
* Returns `true` if the device name has been added or `false` if any
* argument was invalid, if the device was already part of the logical
* interface or if the logical interface is virtual.
*/
deleteDevice: function(device) {
var rv = false;
device = ifnameOf(device);
if (device == null || this.isFloating())
return false;
var wif = getWifiSidByIfname(device);
if (wif != null)
rv = removeValue('wireless', wif, 'network', this.sid);
if (removeValue('network', this.sid, 'device', device))
rv = true;
return rv;
},
/**
* Returns the Linux network device associated with this logical
* interface.
*
* @returns {LuCI.network.Device}
* Returns a `Network.Device` class instance representing the
* expected Linux network device according to the configuration.
*/
getDevice: function() {
if (this.isVirtual()) {
var ifname = '%s-%s'.format(this.getProtocol(), this.sid);
_state.isTunnel[this.getProtocol() + '-' + this.sid] = true;
return Network.prototype.instantiateDevice(ifname, this);
}
else if (this.isBridge()) {
var ifname = 'br-%s'.format(this.sid);
_state.isBridge[ifname] = true;
return new Device(ifname, this);
}
else {
var ifnames = L.toArray(uci.get('network', this.sid, 'device'));
for (var i = 0; i < ifnames.length; i++) {
var m = ifnames[i].match(/^([^:/]+)/);
return ((m && m[1]) ? Network.prototype.instantiateDevice(m[1], this) : null);
}
ifname = getWifiNetidByNetname(this.sid);
return (ifname != null ? Network.prototype.instantiateDevice(ifname[0], this) : null);
}
},
/**
* Returns the layer 2 Linux network device currently associated
* with this logical interface.
*
* @returns {LuCI.network.Device}
* Returns a `Network.Device` class instance representing the Linux
* network device currently associated with the logical interface.
*/
getL2Device: function() {
var ifname = this._ubus('device');
return (ifname != null ? Network.prototype.instantiateDevice(ifname, this) : null);
},
/**
* Returns the layer 3 Linux network device currently associated
* with this logical interface.
*
* @returns {LuCI.network.Device}
* Returns a `Network.Device` class instance representing the Linux
* network device currently associated with the logical interface.
*/
getL3Device: function() {
var ifname = this._ubus('l3_device');
return (ifname != null ? Network.prototype.instantiateDevice(ifname, this) : null);
},
/**
* Returns a list of network sub-devices associated with this logical
* interface.
*
* @returns {null|Array<LuCI.network.Device>}
* Returns an array of `Network.Device` class instances representing
* the sub-devices attached to this logical interface or `null` if the
* logical interface does not support sub-devices, e.g. because it is
* virtual and not a bridge.
*/
getDevices: function() {
var rv = [];
if (!this.isBridge() && !(this.isVirtual() && !this.isFloating()))
return null;
var device = uci.get('network', this.sid, 'device');
if (device && device.charAt(0) != '@') {
var m = device.match(/^([^:/]+)/);
if (m != null)
rv.push(Network.prototype.instantiateDevice(m[1], this));
}
var uciWifiIfaces = uci.sections('wireless', 'wifi-iface');
for (var i = 0; i < uciWifiIfaces.length; i++) {
if (typeof(uciWifiIfaces[i].device) != 'string')
continue;
var networks = L.toArray(uciWifiIfaces[i].network);
for (var j = 0; j < networks.length; j++) {
if (networks[j] != this.sid)
continue;
var netid = getWifiNetidBySid(uciWifiIfaces[i]['.name']);
if (netid != null)
rv.push(Network.prototype.instantiateDevice(netid[0], this));
}
}
rv.sort(deviceSort);
return rv;
},
/**
* Checks whether this logical interface contains the given device
* object.
*
* @param {LuCI.network.Protocol|LuCI.network.Device|LuCI.network.WifiDevice|LuCI.network.WifiNetwork|string} device
* The object or device name to check. In case the given argument is not
* a string, it is resolved though the
* {@link LuCI.network#getIfnameOf Network.getIfnameOf()} function.
*
* @returns {boolean}
* Returns `true` when this logical interface contains the given network
* device or `false` if not.
*/
containsDevice: function(device) {
device = ifnameOf(device);
if (device == null)
return false;
else if (this.isVirtual() && '%s-%s'.format(this.getProtocol(), this.sid) == device)
return true;
else if (this.isBridge() && 'br-%s'.format(this.sid) == device)
return true;
var name = uci.get('network', this.sid, 'device');
if (name) {
var m = name.match(/^([^:/]+)/);
if (m != null && m[1] == device)
return true;
}
var wif = getWifiSidByIfname(device);
if (wif != null) {
var networks = L.toArray(uci.get('wireless', wif, 'network'));
for (var i = 0; i < networks.length; i++)
if (networks[i] == this.sid)
return true;
}
return false;
},
/**
* Cleanup related configuration entries.
*
* This function will be invoked if an interface is about to be removed
* from the configuration and is responsible for performing any required
* cleanup tasks, such as unsetting uci entries in related configurations.
*
* It should be overwritten by protocol specific subclasses.
*
* @abstract
*
* @returns {*|Promise<*>}
* This function may return a promise which is awaited before the rest of
* the configuration is removed. Any non-promise return value and any
* resolved promise value is ignored. If the returned promise is rejected,
* the interface removal will be aborted.
*/
deleteConfiguration: function() {}
});
/**
* @class
* @memberof LuCI.network
* @hideconstructor
* @classdesc
*
* A `Network.Device` class instance represents an underlying Linux network
* device and allows querying device details such as packet statistics or MTU.
*/
Device = baseclass.extend(/** @lends LuCI.network.Device.prototype */ {
__init__: function(device, network) {
var wif = getWifiSidByIfname(device);
if (wif != null) {
var res = getWifiStateBySid(wif) || [],
netid = getWifiNetidBySid(wif) || [];
this.wif = new WifiNetwork(wif, res[0], res[1], netid[0], res[2], { ifname: device });
this.device = this.wif.getIfname();
}
this.device = this.device || device;
this.dev = Object.assign({}, _state.netdevs[this.device]);
this.network = network;
var conf;
uci.sections('network', 'device', function(s) {
if (s.name == device)
conf = s;
});
this.config = Object.assign({}, conf);
},
_devstate: function(/* ... */) {
var rv = this.dev;
for (var i = 0; i < arguments.length; i++)
if (L.isObject(rv))
rv = rv[arguments[i]];
else
return null;
return rv;
},
/**
* Get the name of the network device.
*
* @returns {string}
* Returns the name of the device, e.g. `eth0` or `wlan0`.
*/
getName: function() {
return (this.wif != null ? this.wif.getIfname() : this.device);
},
/**
* Get the MAC address of the device.
*
* @returns {null|string}
* Returns the MAC address of the device or `null` if not applicable,
* e.g. for non-Ethernet tunnel devices.
*/
getMAC: function() {
var mac = this._devstate('macaddr');
return mac ? mac.toUpperCase() : null;
},
/**
* Get the MTU of the device.
*
* @returns {number}
* Returns the MTU of the device.
*/
getMTU: function() {
return this._devstate('mtu');
},
/**
* Get the IPv4 addresses configured on the device.
*
* @returns {string[]}
* Returns an array of IPv4 address strings.
*/
getIPAddrs: function() {
var addrs = this._devstate('ipaddrs');
return (Array.isArray(addrs) ? addrs : []);
},
/**
* Get the IPv6 addresses configured on the device.
*
* @returns {string[]}
* Returns an array of IPv6 address strings.
*/
getIP6Addrs: function() {
var addrs = this._devstate('ip6addrs');
return (Array.isArray(addrs) ? addrs : []);
},
/**
* Get the type of the device.
*
* @returns {string}
* Returns a string describing the type of the network device:
* - `alias` if it is an abstract alias device (`@` notation)
* - `wifi` if it is a wireless interface (e.g. `wlan0`)
* - `bridge` if it is a bridge device (e.g. `br-lan`)
* - `tunnel` if it is a tun or tap device (e.g. `tun0`)
* - `vlan` if it is a vlan device (e.g. `eth0.1`)
* - `switch` if it is a switch device (e.g.`eth1` connected to switch0)
* - `ethernet` for all other device types
*/
getType: function() {
if (this.device != null && this.device.charAt(0) == '@')
return 'alias';
else if (this.dev.devtype == 'wlan' || this.wif != null || isWifiIfname(this.device))
return 'wifi';
else if (this.dev.devtype == 'bridge' || _state.isBridge[this.device])
return 'bridge';
else if (_state.isTunnel[this.device])
return 'tunnel';
else if (this.dev.devtype == 'vlan' || this.device.indexOf('.') > -1)
return 'vlan';
else if (this.dev.devtype == 'dsa' || _state.isSwitch[this.device])
return 'switch';
else if (this.config.type == '8021q' || this.config.type == '8021ad')
return 'vlan';
else if (this.config.type == 'bridge')
return 'bridge';
else
return 'ethernet';
},
/**
* Get a short description string for the device.
*
* @returns {string}
* Returns the device name for non-WiFi devices or a string containing
* the operation mode and SSID for WiFi devices.
*/
getShortName: function() {
if (this.wif != null)
return this.wif.getShortName();
return this.device;
},
/**
* Get a long description string for the device.
*
* @returns {string}
* Returns a string containing the type description and device name
* for non-WiFi devices or operation mode and SSID for WiFi ones.
*/
getI18n: function() {
if (this.wif != null) {
return '%s: %s "%s"'.format(
_('Wireless Network'),
this.wif.getActiveMode(),
this.wif.getActiveSSID() || this.wif.getActiveBSSID() || this.wif.getID() || '?');
}
return '%s: "%s"'.format(this.getTypeI18n(), this.getName());
},
/**
* Get a string describing the device type.
*
* @returns {string}
* Returns a string describing the type, e.g. "Wireless Adapter" or
* "Bridge".
*/
getTypeI18n: function() {
switch (this.getType()) {
case 'alias':
return _('Alias Interface');
case 'wifi':
return _('Wireless Adapter');
case 'bridge':
return _('Bridge');
case 'switch':
return (_state.netdevs[this.device] && _state.netdevs[this.device].devtype == 'dsa')
? _('Switch port') : _('Ethernet Switch');
case 'vlan':
return (_state.isSwitch[this.device] ? _('Switch VLAN') : _('Software VLAN'));
case 'tunnel':
return _('Tunnel Interface');
default:
return _('Ethernet Adapter');
}
},
/**
* Get the associated bridge ports of the device.
*
* @returns {null|Array<LuCI.network.Device>}
* Returns an array of `Network.Device` instances representing the ports
* (slave interfaces) of the bridge or `null` when this device isn't
* a Linux bridge.
*/
getPorts: function() {
var br = _state.bridges[this.device],
rv = [];
if (br == null || !Array.isArray(br.ifnames))
return null;
for (var i = 0; i < br.ifnames.length; i++)
rv.push(Network.prototype.instantiateDevice(br.ifnames[i].name));
rv.sort(deviceSort);
return rv;
},
/**
* Get the bridge ID
*
* @returns {null|string}
* Returns the ID of this network bridge or `null` if this network
* device is not a Linux bridge.
*/
getBridgeID: function() {
var br = _state.bridges[this.device];
return (br != null ? br.id : null);
},
/**
* Get the bridge STP setting
*
* @returns {boolean}
* Returns `true` when this device is a Linux bridge and has `stp`
* enabled, else `false`.
*/
getBridgeSTP: function() {
var br = _state.bridges[this.device];
return (br != null ? !!br.stp : false);
},
/**
* Checks whether this device is up.
*
* @returns {boolean}
* Returns `true` when the associated device is running pr `false`
* when it is down or absent.
*/
isUp: function() {
var up = this._devstate('flags', 'up');
if (up == null)
up = (this.getType() == 'alias');
return up;
},
/**
* Checks whether this device is a Linux bridge.
*
* @returns {boolean}
* Returns `true` when the network device is present and a Linux bridge,
* else `false`.
*/
isBridge: function() {
return (this.getType() == 'bridge');
},
/**
* Checks whether this device is part of a Linux bridge.
*
* @returns {boolean}
* Returns `true` when this network device is part of a bridge,
* else `false`.
*/
isBridgePort: function() {
return (this._devstate('bridge') != null);
},
/**
* Get the amount of transmitted bytes.
*
* @returns {number}
* Returns the amount of bytes transmitted by the network device.
*/
getTXBytes: function() {
var stat = this._devstate('stats');
return (stat != null ? stat.tx_bytes || 0 : 0);
},
/**
* Get the amount of received bytes.
*
* @returns {number}
* Returns the amount of bytes received by the network device.
*/
getRXBytes: function() {
var stat = this._devstate('stats');
return (stat != null ? stat.rx_bytes || 0 : 0);
},
/**
* Get the amount of transmitted packets.
*
* @returns {number}
* Returns the amount of packets transmitted by the network device.
*/
getTXPackets: function() {
var stat = this._devstate('stats');
return (stat != null ? stat.tx_packets || 0 : 0);
},
/**
* Get the amount of received packets.
*
* @returns {number}
* Returns the amount of packets received by the network device.
*/
getRXPackets: function() {
var stat = this._devstate('stats');
return (stat != null ? stat.rx_packets || 0 : 0);
},
/**
* Get the carrier state of the network device.
*
* @returns {boolean}
* Returns true if the device has a carrier, e.g. when a cable is
* inserted into an Ethernet port of false if there is none.
*/
getCarrier: function() {
var link = this._devstate('link');
return (link != null ? link.carrier || false : false);
},
/**
* Get the current link speed of the network device if available.
*
* @returns {number|null}
* Returns the current speed of the network device in Mbps. If the
* device supports no Ethernet speed levels, null is returned.
* If the device supports Ethernet speeds but has no carrier, -1 is
* returned.
*/
getSpeed: function() {
var link = this._devstate('link');
return (link != null ? link.speed || null : null);
},
/**
* Get the current duplex mode of the network device if available.
*
* @returns {string|null}
* Returns the current duplex mode of the network device. Returns
* either "full" or "half" if the device supports duplex modes or
* null if the duplex mode is unknown or unsupported.
*/
getDuplex: function() {
var link = this._devstate('link'),
duplex = link ? link.duplex : null;
return (duplex != 'unknown') ? duplex : null;
},
/**
* Get the primary logical interface this device is assigned to.
*
* @returns {null|LuCI.network.Protocol}
* Returns a `Network.Protocol` instance representing the logical
* interface this device is attached to or `null` if it is not
* assigned to any logical interface.
*/
getNetwork: function() {
return this.getNetworks()[0];
},
/**
* Get the logical interfaces this device is assigned to.
*
* @returns {Array<LuCI.network.Protocol>}
* Returns an array of `Network.Protocol` instances representing the
* logical interfaces this device is assigned to.
*/
getNetworks: function() {
if (this.networks == null) {
this.networks = [];
var networks = enumerateNetworks.apply(L.network);
for (var i = 0; i < networks.length; i++)
if (networks[i].containsDevice(this.device) || networks[i].getIfname() == this.device)
this.networks.push(networks[i]);
this.networks.sort(networkSort);
}
return this.networks;
},
/**
* Get the related wireless network this device is related to.
*
* @returns {null|LuCI.network.WifiNetwork}
* Returns a `Network.WifiNetwork` instance representing the wireless
* network corresponding to this network device or `null` if this device
* is not a wireless device.
*/
getWifiNetwork: function() {
return (this.wif != null ? this.wif : null);
},
/**
* Get the logical parent device of this device.
*
* In case of DSA switch ports, the parent device will be the DSA switch
* device itself, for VLAN devices, the parent refers to the base device
* etc.
*
* @returns {null|LuCI.network.Device}
* Returns a `Network.Device` instance representing the parent device or
* `null` when this device has no parent, as it is the case for e.g.
* ordinary Ethernet interfaces.
*/
getParent: function() {
if (this.dev.parent)
return Network.prototype.instantiateDevice(this.dev.parent);
if ((this.config.type == '8021q' || this.config.type == '802ad') && typeof(this.config.ifname) == 'string')
return Network.prototype.instantiateDevice(this.config.ifname);
return null;
}
});
/**
* @class
* @memberof LuCI.network
* @hideconstructor
* @classdesc
*
* A `Network.WifiDevice` class instance represents a wireless radio device
* present on the system and provides wireless capability information as
* well as methods for enumerating related wireless networks.
*/
WifiDevice = baseclass.extend(/** @lends LuCI.network.WifiDevice.prototype */ {
__init__: function(name, radiostate) {
var uciWifiDevice = uci.get('wireless', name);
if (uciWifiDevice != null &&
uciWifiDevice['.type'] == 'wifi-device' &&
uciWifiDevice['.name'] != null) {
this.sid = uciWifiDevice['.name'];
}
this.sid = this.sid || name;
this._ubusdata = {
radio: name,
dev: radiostate
};
},
/* private */
ubus: function(/* ... */) {
var v = this._ubusdata;
for (var i = 0; i < arguments.length; i++)
if (L.isObject(v))
v = v[arguments[i]];
else
return null;
return v;
},
/**
* Read the given UCI option value of this wireless device.
*
* @param {string} opt
* The UCI option name to read.
*
* @returns {null|string|string[]}
* Returns the UCI option value or `null` if the requested option is
* not found.
*/
get: function(opt) {
return uci.get('wireless', this.sid, opt);
},
/**
* Set the given UCI option of this network to the given value.
*
* @param {string} opt
* The name of the UCI option to set.
*
* @param {null|string|string[]} value
* The value to set or `null` to remove the given option from the
* configuration.
*/
set: function(opt, value) {
return uci.set('wireless', this.sid, opt, value);
},
/**
* Checks whether this wireless radio is disabled.
*
* @returns {boolean}
* Returns `true` when the wireless radio is marked as disabled in `ubus`
* runtime state or when the `disabled` option is set in the corresponding
* UCI configuration.
*/
isDisabled: function() {
return this.ubus('dev', 'disabled') || this.get('disabled') == '1';
},
/**
* Get the configuration name of this wireless radio.
*
* @returns {string}
* Returns the UCI section name (e.g. `radio0`) of the corresponding
* radio configuration which also serves as unique logical identifier
* for the wireless phy.
*/
getName: function() {
return this.sid;
},
/**
* Gets a list of supported hwmodes.
*
* The hwmode values describe the frequency band and wireless standard
* versions supported by the wireless phy.
*
* @returns {string[]}
* Returns an array of valid hwmode values for this radio. Currently
* known mode values are:
* - `a` - Legacy 802.11a mode, 5 GHz, up to 54 Mbit/s
* - `b` - Legacy 802.11b mode, 2.4 GHz, up to 11 Mbit/s
* - `g` - Legacy 802.11g mode, 2.4 GHz, up to 54 Mbit/s
* - `n` - IEEE 802.11n mode, 2.4 or 5 GHz, up to 600 Mbit/s
* - `ac` - IEEE 802.11ac mode, 5 GHz, up to 6770 Mbit/s
* - `ax` - IEEE 802.11ax mode, 2.4 or 5 GHz
* - 'be' - IEEE 802.11be mode, 2.4, 5 or 6 GHz
*/
getHWModes: function() {
var hwmodes = this.ubus('dev', 'iwinfo', 'hwmodes');
return Array.isArray(hwmodes) ? hwmodes : [ 'b', 'g' ];
},
/**
* Gets a list of supported htmodes.
*
* The htmode values describe the wide-frequency options supported by
* the wireless phy.
*
* @returns {string[]}
* Returns an array of valid htmode values for this radio. Currently
* known mode values are:
* - `HT20` - applicable to IEEE 802.11n, 20 MHz wide channels
* - `HT40` - applicable to IEEE 802.11n, 40 MHz wide channels
* - `VHT20` - applicable to IEEE 802.11ac, 20 MHz wide channels
* - `VHT40` - applicable to IEEE 802.11ac, 40 MHz wide channels
* - `VHT80` - applicable to IEEE 802.11ac, 80 MHz wide channels
* - `VHT160` - applicable to IEEE 802.11ac, 160 MHz wide channels
* - `HE20` - applicable to IEEE 802.11ax, 20 MHz wide channels
* - `HE40` - applicable to IEEE 802.11ax, 40 MHz wide channels
* - `HE80` - applicable to IEEE 802.11ax, 80 MHz wide channels
* - `HE160` - applicable to IEEE 802.11ax, 160 MHz wide channels
* - `EHT20` - applicable to IEEE 802.11be, 20 MHz wide channels
* - `EHT40` - applicable to IEEE 802.11be, 40 MHz wide channels
* - `EHT80` - applicable to IEEE 802.11be, 80 MHz wide channels
* - `EHT160` - applicable to IEEE 802.11be, 160 MHz wide channels
* - `EHT320` - applicable to IEEE 802.11be, 320 MHz wide channels
*/
getHTModes: function() {
var htmodes = this.ubus('dev', 'iwinfo', 'htmodes');
return (Array.isArray(htmodes) && htmodes.length) ? htmodes : null;
},
/**
* Get a string describing the wireless radio hardware.
*
* @returns {string}
* Returns the description string.
*/
getI18n: function() {
var hw = this.ubus('dev', 'iwinfo', 'hardware'),
type = L.isObject(hw) ? hw.name : null;
var modes = this.ubus('dev', 'iwinfo', 'hwmodes_text');
if (this.ubus('dev', 'iwinfo', 'type') == 'wl')
type = 'Broadcom';
return '%s %s Wireless Controller (%s)'.format(
type || 'Generic',
modes ? '802.11' + modes : 'unknown',
this.getName());
},
/**
* A wireless scan result object describes a neighbouring wireless
* network found in the vicinity.
*
* @typedef {Object<string, number|string|LuCI.network.WifiEncryption>} WifiScanResult
* @memberof LuCI.network
*
* @property {string} ssid
* The SSID / Mesh ID of the network.
*
* @property {string} bssid
* The BSSID if the network.
*
* @property {string} mode
* The operation mode of the network (`Master`, `Ad-Hoc`, `Mesh Point`).
*
* @property {number} channel
* The wireless channel of the network.
*
* @property {number} signal
* The received signal strength of the network in dBm.
*
* @property {number} quality
* The numeric quality level of the signal, can be used in conjunction
* with `quality_max` to calculate a quality percentage.
*
* @property {number} quality_max
* The maximum possible quality level of the signal, can be used in
* conjunction with `quality` to calculate a quality percentage.
*
* @property {LuCI.network.WifiEncryption} encryption
* The encryption used by the wireless network.
*/
/**
* Trigger a wireless scan on this radio device and obtain a list of
* nearby networks.
*
* @returns {Promise<Array<LuCI.network.WifiScanResult>>}
* Returns a promise resolving to an array of scan result objects
* describing the networks found in the vicinity.
*/
getScanList: function() {
return callIwinfoScan(this.sid);
},
/**
* Check whether the wireless radio is marked as up in the `ubus`
* runtime state.
*
* @returns {boolean}
* Returns `true` when the radio device is up, else `false`.
*/
isUp: function() {
if (L.isObject(_state.radios[this.sid]))
return (_state.radios[this.sid].up == true);
return false;
},
/**
* Get the wifi network of the given name belonging to this radio device
*
* @param {string} network
* The name of the wireless network to look up. This may be either an uci
* configuration section ID, a network ID in the form `radio#.network#`
* or a Linux network device name like `wlan0` which is resolved to the
* corresponding configuration section through `ubus` runtime information.
*
* @returns {Promise<LuCI.network.WifiNetwork>}
* Returns a promise resolving to a `Network.WifiNetwork` instance
* representing the wireless network and rejecting with `null` if
* the given network could not be found or is not associated with
* this radio device.
*/
getWifiNetwork: function(network) {
return Network.prototype.getWifiNetwork(network).then(L.bind(function(networkInstance) {
var uciWifiIface = (networkInstance.sid ? uci.get('wireless', networkInstance.sid) : null);
if (uciWifiIface == null || uciWifiIface['.type'] != 'wifi-iface' || uciWifiIface.device != this.sid)
return Promise.reject();
return networkInstance;
}, this));
},
/**
* Get all wireless networks associated with this wireless radio device.
*
* @returns {Promise<Array<LuCI.network.WifiNetwork>>}
* Returns a promise resolving to an array of `Network.WifiNetwork`
* instances representing the wireless networks associated with this
* radio device.
*/
getWifiNetworks: function() {
return Network.prototype.getWifiNetworks().then(L.bind(function(networks) {
var rv = [];
for (var i = 0; i < networks.length; i++)
if (networks[i].getWifiDeviceName() == this.getName())
rv.push(networks[i]);
return rv;
}, this));
},
/**
* Adds a new wireless network associated with this radio device to the
* configuration and sets its options to the provided values.
*
* @param {Object<string, string|string[]>} [options]
* The options to set for the newly added wireless network.
*
* @returns {Promise<null|LuCI.network.WifiNetwork>}
* Returns a promise resolving to a `WifiNetwork` instance describing
* the newly added wireless network or `null` if the given options
* were invalid.
*/
addWifiNetwork: function(options) {
if (!L.isObject(options))
options = {};
options.device = this.sid;
return Network.prototype.addWifiNetwork(options);
},
/**
* Deletes the wireless network with the given name associated with this
* radio device.
*
* @param {string} network
* The name of the wireless network to look up. This may be either an uci
* configuration section ID, a network ID in the form `radio#.network#`
* or a Linux network device name like `wlan0` which is resolved to the
* corresponding configuration section through `ubus` runtime information.
*
* @returns {Promise<boolean>}
* Returns a promise resolving to `true` when the wireless network was
* successfully deleted from the configuration or `false` when the given
* network could not be found or if the found network was not associated
* with this wireless radio device.
*/
deleteWifiNetwork: function(network) {
var sid = null;
if (network instanceof WifiNetwork) {
sid = network.sid;
}
else {
var uciWifiIface = uci.get('wireless', network);
if (uciWifiIface == null || uciWifiIface['.type'] != 'wifi-iface')
sid = getWifiSidByIfname(network);
}
if (sid == null || uci.get('wireless', sid, 'device') != this.sid)
return Promise.resolve(false);
uci.delete('wireless', network);
return Promise.resolve(true);
}
});
/**
* @class
* @memberof LuCI.network
* @hideconstructor
* @classdesc
*
* A `Network.WifiNetwork` instance represents a wireless network (vif)
* configured on top of a radio device and provides functions for querying
* the runtime state of the network. Most radio devices support multiple
* such networks in parallel.
*/
WifiNetwork = baseclass.extend(/** @lends LuCI.network.WifiNetwork.prototype */ {
__init__: function(sid, radioname, radiostate, netid, netstate, hostapd) {
this.sid = sid;
this.netid = netid;
this._ubusdata = {
hostapd: hostapd,
radio: radioname,
dev: radiostate,
net: netstate
};
},
ubus: function(/* ... */) {
var v = this._ubusdata;
for (var i = 0; i < arguments.length; i++)
if (L.isObject(v))
v = v[arguments[i]];
else
return null;
return v;
},
/**
* Read the given UCI option value of this wireless network.
*
* @param {string} opt
* The UCI option name to read.
*
* @returns {null|string|string[]}
* Returns the UCI option value or `null` if the requested option is
* not found.
*/
get: function(opt) {
return uci.get('wireless', this.sid, opt);
},
/**
* Set the given UCI option of this network to the given value.
*
* @param {string} opt
* The name of the UCI option to set.
*
* @param {null|string|string[]} value
* The value to set or `null` to remove the given option from the
* configuration.
*/
set: function(opt, value) {
return uci.set('wireless', this.sid, opt, value);
},
/**
* Checks whether this wireless network is disabled.
*
* @returns {boolean}
* Returns `true` when the wireless radio is marked as disabled in `ubus`
* runtime state or when the `disabled` option is set in the corresponding
* UCI configuration.
*/
isDisabled: function() {
return this.ubus('dev', 'disabled') || this.get('disabled') == '1';
},
/**
* Get the configured operation mode of the wireless network.
*
* @returns {string}
* Returns the configured operation mode. Possible values are:
* - `ap` - Master (Access Point) mode
* - `sta` - Station (client) mode
* - `adhoc` - Ad-Hoc (IBSS) mode
* - `mesh` - Mesh (IEEE 802.11s) mode
* - `monitor` - Monitor mode
*/
getMode: function() {
return this.ubus('net', 'config', 'mode') || this.get('mode') || 'ap';
},
/**
* Get the configured SSID of the wireless network.
*
* @returns {null|string}
* Returns the configured SSID value or `null` when this network is
* in mesh mode.
*/
getSSID: function() {
if (this.getMode() == 'mesh')
return null;
return this.ubus('net', 'config', 'ssid') || this.get('ssid');
},
/**
* Get the configured Mesh ID of the wireless network.
*
* @returns {null|string}
* Returns the configured mesh ID value or `null` when this network
* is not in mesh mode.
*/
getMeshID: function() {
if (this.getMode() != 'mesh')
return null;
return this.ubus('net', 'config', 'mesh_id') || this.get('mesh_id');
},
/**
* Get the configured BSSID of the wireless network.
*
* @returns {null|string}
* Returns the BSSID value or `null` if none has been specified.
*/
getBSSID: function() {
return this.ubus('net', 'config', 'bssid') || this.get('bssid');
},
/**
* Get the names of the logical interfaces this wireless network is
* attached to.
*
* @returns {string[]}
* Returns an array of logical interface names.
*/
getNetworkNames: function() {
return L.toArray(this.ubus('net', 'config', 'network') || this.get('network'));
},
/**
* Get the internal network ID of this wireless network.
*
* The network ID is a LuCI specific identifier in the form
* `radio#.network#` to identify wireless networks by their corresponding
* radio and network index numbers.
*
* @returns {string}
* Returns the LuCI specific network ID.
*/
getID: function() {
return this.netid;
},
/**
* Get the configuration ID of this wireless network.
*
* @returns {string}
* Returns the corresponding UCI section ID of the network.
*/
getName: function() {
return this.sid;
},
/**
* Get the Linux network device name.
*
* @returns {null|string}
* Returns the current Linux network device name as resolved from
* `ubus` runtime information or `null` if this network has no
* associated network device, e.g. when not configured or up.
*/
getIfname: function() {
var ifname = this.ubus('net', 'ifname') || this.ubus('net', 'iwinfo', 'ifname');
if (ifname == null || ifname.match(/^(wifi|radio)\d/))
ifname = this.netid;
return ifname;
},
/**
* Get the Linux VLAN network device names.
*
* @returns {string[]}
* Returns the current Linux VLAN network device name as resolved
* from `ubus` runtime information or empty array if this network
* has no associated VLAN network devices.
*/
getVlanIfnames: function() {
var vlans = L.toArray(this.ubus('net', 'vlans')),
ifnames = [];
for (var i = 0; i < vlans.length; i++)
ifnames.push(vlans[i]['ifname']);
return ifnames;
},
/**
* Get the name of the corresponding WiFi radio device.
*
* @returns {null|string}
* Returns the name of the radio device this network is configured on
* or `null` if it cannot be determined.
*/
getWifiDeviceName: function() {
return this.ubus('radio') || this.get('device');
},
/**
* Get the corresponding WiFi radio device.
*
* @returns {null|LuCI.network.WifiDevice}
* Returns a `Network.WifiDevice` instance representing the corresponding
* WiFi radio device or `null` if the related radio device could not be
* found.
*/
getWifiDevice: function() {
var radioname = this.getWifiDeviceName();
if (radioname == null)
return Promise.reject();
return Network.prototype.getWifiDevice(radioname);
},
/**
* Check whether the radio network is up.
*
* This function actually queries the up state of the related radio
* device and assumes this network to be up as well when the parent
* radio is up. This is due to the fact that OpenWrt does not control
* virtual interfaces individually but within one common hostapd
* instance.
*
* @returns {boolean}
* Returns `true` when the network is up, else `false`.
*/
isUp: function() {
var device = this.getDevice();
if (device == null)
return false;
return device.isUp();
},
/**
* Query the current operation mode from runtime information.
*
* @returns {string}
* Returns the human readable mode name as reported by iwinfo or uci mode.
* Possible returned values are:
* - `Master`
* - `Ad-Hoc`
* - `Client`
* - `Monitor`
* - `Master (VLAN)`
* - `WDS`
* - `Mesh Point`
* - `P2P Client`
* - `P2P Go`
* - `Unknown`
*/
getActiveMode: function() {
var mode = this.ubus('net', 'iwinfo', 'mode') || this.getMode();
switch (mode) {
case 'ap': return 'Master';
case 'sta': return 'Client';
case 'adhoc': return 'Ad-Hoc';
case 'mesh': return 'Mesh Point';
case 'monitor': return 'Monitor';
default: return mode;
}
},
/**
* Query the current operation mode from runtime information as
* translated string.
*
* @returns {string}
* Returns the translated, human readable mode name as reported by
*`ubus` runtime state.
*/
getActiveModeI18n: function() {
var mode = this.getActiveMode();
switch (mode) {
case 'Master': return _('Access Point');
case 'Ad-Hoc': return _('Ad-Hoc');
case 'Client': return _('Client');
case 'Monitor': return _('Monitor');
case 'Master(VLAN)': return _('Master (VLAN)');
case 'WDS': return _('WDS');
case 'Mesh Point': return _('Mesh Point');
case 'P2P Client': return _('P2P Client');
case 'P2P Go': return _('P2P Go');
case 'Unknown': return _('Unknown');
default: return mode;
}
},
/**
* Query the current SSID from runtime information.
*
* @returns {string}
* Returns the current SSID or Mesh ID as reported by `ubus` runtime
* information.
*/
getActiveSSID: function() {
return this.ubus('net', 'iwinfo', 'ssid') || this.ubus('net', 'config', 'ssid') || this.get('ssid');
},
/**
* Query the current BSSID from runtime information.
*
* @returns {string}
* Returns the current BSSID or Mesh ID as reported by `ubus` runtime
* information.
*/
getActiveBSSID: function() {
return this.ubus('net', 'iwinfo', 'bssid') || this.ubus('net', 'config', 'bssid') || this.get('bssid');
},
/**
* Query the current encryption settings from runtime information.
*
* @returns {string}
* Returns a string describing the current encryption or `-` if the
* encryption state could not be found in `ubus` runtime information.
*/
getActiveEncryption: function() {
return formatWifiEncryption(this.ubus('net', 'iwinfo', 'encryption')) || '-';
},
/**
* A wireless peer entry describes the properties of a remote wireless
* peer associated with a local network.
*
* @typedef {Object<string, boolean|number|string|LuCI.network.WifiRateEntry>} WifiPeerEntry
* @memberof LuCI.network
*
* @property {string} mac
* The MAC address (BSSID).
*
* @property {number} signal
* The received signal strength.
*
* @property {number} [signal_avg]
* The average signal strength if supported by the driver.
*
* @property {number} [noise]
* The current noise floor of the radio. May be `0` or absent if not
* supported by the driver.
*
* @property {number} inactive
* The amount of milliseconds the peer has been inactive, e.g. due
* to power-saving.
*
* @property {number} connected_time
* The amount of milliseconds the peer is associated to this network.
*
* @property {number} [thr]
* The estimated throughput of the peer, May be `0` or absent if not
* supported by the driver.
*
* @property {boolean} authorized
* Specifies whether the peer is authorized to associate to this network.
*
* @property {boolean} authenticated
* Specifies whether the peer completed authentication to this network.
*
* @property {string} preamble
* The preamble mode used by the peer. May be `long` or `short`.
*
* @property {boolean} wme
* Specifies whether the peer supports WME/WMM capabilities.
*
* @property {boolean} mfp
* Specifies whether management frame protection is active.
*
* @property {boolean} tdls
* Specifies whether TDLS is active.
*
* @property {number} [mesh llid]
* The mesh LLID, may be `0` or absent if not applicable or supported
* by the driver.
*
* @property {number} [mesh plid]
* The mesh PLID, may be `0` or absent if not applicable or supported
* by the driver.
*
* @property {string} [mesh plink]
* The mesh peer link state description, may be an empty string (`''`)
* or absent if not applicable or supported by the driver.
*
* The following states are known:
* - `LISTEN`
* - `OPN_SNT`
* - `OPN_RCVD`
* - `CNF_RCVD`
* - `ESTAB`
* - `HOLDING`
* - `BLOCKED`
* - `UNKNOWN`
*
* @property {number} [mesh local PS]
* The local power-save mode for the peer link, may be an empty
* string (`''`) or absent if not applicable or supported by
* the driver.
*
* The following modes are known:
* - `ACTIVE` (no power save)
* - `LIGHT SLEEP`
* - `DEEP SLEEP`
* - `UNKNOWN`
*
* @property {number} [mesh peer PS]
* The remote power-save mode for the peer link, may be an empty
* string (`''`) or absent if not applicable or supported by
* the driver.
*
* The following modes are known:
* - `ACTIVE` (no power save)
* - `LIGHT SLEEP`
* - `DEEP SLEEP`
* - `UNKNOWN`
*
* @property {number} [mesh non-peer PS]
* The power-save mode for all non-peer neighbours, may be an empty
* string (`''`) or absent if not applicable or supported by the driver.
*
* The following modes are known:
* - `ACTIVE` (no power save)
* - `LIGHT SLEEP`
* - `DEEP SLEEP`
* - `UNKNOWN`
*
* @property {LuCI.network.WifiRateEntry} rx
* Describes the receiving wireless rate from the peer.
*
* @property {LuCI.network.WifiRateEntry} tx
* Describes the transmitting wireless rate to the peer.
*/
/**
* A wireless rate entry describes the properties of a wireless
* transmission rate to or from a peer.
*
* @typedef {Object<string, boolean|number>} WifiRateEntry
* @memberof LuCI.network
*
* @property {number} [drop_misc]
* The amount of received misc. packages that have been dropped, e.g.
* due to corruption or missing authentication. Only applicable to
* receiving rates.
*
* @property {number} packets
* The amount of packets that have been received or sent.
*
* @property {number} bytes
* The amount of bytes that have been received or sent.
*
* @property {number} [failed]
* The amount of failed transmission attempts. Only applicable to
* transmit rates.
*
* @property {number} [retries]
* The amount of retried transmissions. Only applicable to transmit
* rates.
*
* @property {boolean} is_ht
* Specifies whether this rate is an HT (IEEE 802.11n) rate.
*
* @property {boolean} is_vht
* Specifies whether this rate is an VHT (IEEE 802.11ac) rate.
*
* @property {number} mhz
* The channel width in MHz used for the transmission.
*
* @property {number} rate
* The bitrate in bit/s of the transmission.
*
* @property {number} [mcs]
* The MCS index of the used transmission rate. Only applicable to
* HT or VHT rates.
*
* @property {number} [40mhz]
* Specifies whether the transmission rate used 40MHz wide channel.
* Only applicable to HT or VHT rates.
*
* Note: this option exists for backwards compatibility only and its
* use is discouraged. The `mhz` field should be used instead to
* determine the channel width.
*
* @property {boolean} [short_gi]
* Specifies whether a short guard interval is used for the transmission.
* Only applicable to HT or VHT rates.
*
* @property {number} [nss]
* Specifies the number of spatial streams used by the transmission.
* Only applicable to VHT rates.
*
* @property {boolean} [he]
* Specifies whether this rate is an HE (IEEE 802.11ax) rate.
*
* @property {number} [he_gi]
* Specifies whether the guard interval used for the transmission.
* Only applicable to HE rates.
*
* @property {number} [he_dcm]
* Specifies whether dual concurrent modulation is used for the transmission.
* Only applicable to HE rates.
*
* @property {boolean} [eht]
* Specifies whether this rate is an EHT (IEEE 802.11be) rate.
*
* @property {number} [eht_gi]
* Specifies whether the guard interval used for the transmission.
* Only applicable to EHT rates.
*
* @property {number} [eht_dcm]
* Specifies whether dual concurrent modulation is used for the transmission.
* Only applicable to EHT rates.
*/
/**
* Fetch the list of associated peers.
*
* @returns {Promise<Array<LuCI.network.WifiPeerEntry>>}
* Returns a promise resolving to an array of wireless peers associated
* with this network.
*/
getAssocList: function() {
var tasks = [];
var ifnames = [ this.getIfname() ].concat(this.getVlanIfnames());
for (var i = 0; i < ifnames.length; i++)
tasks.push(callIwinfoAssoclist(ifnames[i]));
return Promise.all(tasks).then(function(values) {
return Array.prototype.concat.apply([], values);
});
},
/**
* Query the current operating frequency of the wireless network.
*
* @returns {null|string}
* Returns the current operating frequency of the network from `ubus`
* runtime information in GHz or `null` if the information is not
* available.
*/
getFrequency: function() {
var freq = this.ubus('net', 'iwinfo', 'frequency');
if (freq != null && freq > 0)
return '%.03f'.format(freq / 1000);
return null;
},
/**
* Query the current average bit-rate of all peers associated to this
* wireless network.
*
* @returns {null|number}
* Returns the average bit rate among all peers associated to the network
* as reported by `ubus` runtime information or `null` if the information
* is not available.
*/
getBitRate: function() {
var rate = this.ubus('net', 'iwinfo', 'bitrate');
if (rate != null && rate > 0)
return (rate / 1000);
return null;
},
/**
* Query the current wireless channel.
*
* @returns {null|number}
* Returns the wireless channel as reported by `ubus` runtime information
* or `null` if it cannot be determined.
*/
getChannel: function() {
return this.ubus('net', 'iwinfo', 'channel') || this.ubus('dev', 'config', 'channel') || this.get('channel');
},
/**
* Query the current wireless signal.
*
* @returns {null|number}
* Returns the wireless signal in dBm as reported by `ubus` runtime
* information or `null` if it cannot be determined.
*/
getSignal: function() {
return this.ubus('net', 'iwinfo', 'signal') || 0;
},
/**
* Query the current radio noise floor.
*
* @returns {number}
* Returns the radio noise floor in dBm as reported by `ubus` runtime
* information or `0` if it cannot be determined.
*/
getNoise: function() {
return this.ubus('net', 'iwinfo', 'noise') || 0;
},
/**
* Query the current country code.
*
* @returns {string}
* Returns the wireless country code as reported by `ubus` runtime
* information or `00` if it cannot be determined.
*/
getCountryCode: function() {
return this.ubus('net', 'iwinfo', 'country') || this.ubus('dev', 'config', 'country') || '00';
},
/**
* Query the current radio TX power.
*
* @returns {null|number}
* Returns the wireless network transmit power in dBm as reported by
* `ubus` runtime information or `null` if it cannot be determined.
*/
getTXPower: function() {
return this.ubus('net', 'iwinfo', 'txpower');
},
/**
* Query the radio TX power offset.
*
* Some wireless radios have a fixed power offset, e.g. due to the
* use of external amplifiers.
*
* @returns {number}
* Returns the wireless network transmit power offset in dBm as reported
* by `ubus` runtime information or `0` if there is no offset, or if it
* cannot be determined.
*/
getTXPowerOffset: function() {
return this.ubus('net', 'iwinfo', 'txpower_offset') || 0;
},
/**
* Calculate the current signal.
*
* @deprecated
* @returns {number}
* Returns the calculated signal level, which is the difference between
* noise and signal (SNR), divided by 5.
*/
getSignalLevel: function(signal, noise) {
if (this.getActiveBSSID() == '00:00:00:00:00:00')
return -1;
signal = signal || this.getSignal();
noise = noise || this.getNoise();
if (signal < 0 && noise < 0) {
var snr = -1 * (noise - signal);
return Math.floor(snr / 5);
}
return 0;
},
/**
* Calculate the current signal quality percentage.
*
* @returns {number}
* Returns the calculated signal quality in percent. The value is
* calculated from the `quality` and `quality_max` indicators reported
* by `ubus` runtime state.
*/
getSignalPercent: function() {
var qc = this.ubus('net', 'iwinfo', 'quality') || 0,
qm = this.ubus('net', 'iwinfo', 'quality_max') || 0;
if (qc > 0 && qm > 0)
return Math.floor((100 / qm) * qc);
return 0;
},
/**
* Get a short description string for this wireless network.
*
* @returns {string}
* Returns a string describing this network, consisting of the
* active operation mode, followed by either the SSID, BSSID or
* internal network ID, depending on which information is available.
*/
getShortName: function() {
return '%s "%s"'.format(
this.getActiveModeI18n(),
this.getActiveSSID() || this.getActiveBSSID() || this.getID());
},
/**
* Get a description string for this wireless network.
*
* @returns {string}
* Returns a string describing this network, consisting of the
* term `Wireless Network`, followed by the active operation mode,
* the SSID, BSSID or internal network ID and the Linux network device
* name, depending on which information is available.
*/
getI18n: function() {
return '%s: %s "%s" (%s)'.format(
_('Wireless Network'),
this.getActiveModeI18n(),
this.getActiveSSID() || this.getActiveBSSID() || this.getID(),
this.getIfname());
},
/**
* Get the primary logical interface this network is attached to.
*
* @returns {null|LuCI.network.Protocol}
* Returns a `Network.Protocol` instance representing the logical
* interface or `null` if this network is not attached to any logical
* interface.
*/
getNetwork: function() {
return this.getNetworks()[0];
},
/**
* Get the logical interfaces this network is attached to.
*
* @returns {Array<LuCI.network.Protocol>}
* Returns an array of `Network.Protocol` instances representing the
* logical interfaces this wireless network is attached to.
*/
getNetworks: function() {
var networkNames = this.getNetworkNames(),
networks = [];
for (var i = 0; i < networkNames.length; i++) {
var uciInterface = uci.get('network', networkNames[i]);
if (uciInterface == null || uciInterface['.type'] != 'interface')
continue;
networks.push(Network.prototype.instantiateNetwork(networkNames[i]));
}
networks.sort(networkSort);
return networks;
},
/**
* Get the associated Linux network device.
*
* @returns {LuCI.network.Device}
* Returns a `Network.Device` instance representing the Linux network
* device associated with this wireless network.
*/
getDevice: function() {
return Network.prototype.instantiateDevice(this.getIfname());
},
/**
* Check whether this WiFi network supports de-authenticating clients.
*
* @returns {boolean}
* Returns `true` when this WiFi network instance supports forcibly
* de-authenticating clients, otherwise `false`.
*/
isClientDisconnectSupported: function() {
return L.isObject(this.ubus('hostapd', 'del_client'));
},
/**
* Forcibly disconnect the given client from the wireless network.
*
* @param {string} mac
* The MAC address of the client to disconnect.
*
* @param {boolean} [deauth=false]
* Specifies whether to de-authenticate (`true`) or disassociate (`false`)
* the client.
*
* @param {number} [reason=1]
* Specifies the IEEE 802.11 reason code to disassoc/deauth the client
* with. Default is `1` which corresponds to `Unspecified reason`.
*
* @param {number} [ban_time=0]
* Specifies the amount of milliseconds to ban the client from
* reconnecting. By default, no ban time is set which allows the client
* to re-associate / reauthenticate immediately.
*
* @returns {Promise<number>}
* Returns a promise resolving to the underlying ubus call result code
* which is typically `0`, even for not existing MAC addresses.
* The promise might reject with an error in case invalid arguments
* are passed.
*/
disconnectClient: function(mac, deauth, reason, ban_time) {
if (reason == null || reason == 0)
reason = 1;
if (ban_time == 0)
ban_time = null;
return rpc.declare({
object: 'hostapd.%s'.format(this.getIfname()),
method: 'del_client',
params: [ 'addr', 'deauth', 'reason', 'ban_time' ]
})(mac, deauth, reason, ban_time);
}
});
return Network;